OSHA Inspection: DELUXE MANUFACTURING

Issued

2019-08-19 00:00:00

Abate by

2019-09-13 00:00:00

Penalty

Initial $5683.00 · Current $3978.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.  (a) Throughout facility: There were no machine specific lockout tagout procedures for machines that had more than one power source, and were hard wired in, such as, but not limited to, the Schreiber 500 Press which has air, and electric power sources.

Issued

2019-08-19 00:00:00

Abate by

2019-09-13 00:00:00

Penalty

Initial $7577.00 · Current $5304.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, unused portions of blades, flying chips and sparks:  Employees engaged in clean-up and production activities at the following pieces of equipment were exposed to injury form rotating parts of equipment in that machine guarding was not provided:          a)  The rollers were not provided with guards on collator 58 in the collating area exposing the operator to rotating parts of equipment.      b)  The fan blades for the Schriber 500 press, back side of the machine, had inadequate guarding, exposing the operator to rotating parts of equipment in the press area.      c)  The Schreiber 500 press form line shaft hand wheel, right side of  the machine, was not provided with a guard exposing the operator to rotating parts of equipment in the press area.