EMIGSVILLE, PA —
OSHA Inspection: SHARRETTS PLATING COMPANY, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SHARRETTS PLATING COMPANY, INC. in 3315 CONNELLEY ROAD, EMIGSVILLE, PA 17318 (NAICS 332813). OSHA activity number 344094578.
Where did this inspection happen?
- Establishment
- SHARRETTS PLATING COMPANY, INC.
- Site address
- 3315 CONNELLEY ROAD
- City
- EMIGSVILLE
- State
- PA
- ZIP
- 17318
- Mailing
- 3315 CONNELLY ROAD, EMIGSVILLE, PA 17318
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 25
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.29 A02
- Issued
- Abate by
- Penalty
- Initial $2273.00 · Current $1545.00 Reduced
General-duty citation text
29 CFR 1910.29(a)(2): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings on all open sides: a). Hazardous Waste Neutralizing Area - On or about June 19, 2019, the platform used to access the two 1200 gallon neutralizing tanks did not have standard guardrail system to prevent employee from falling to the ground level. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $1545
- — C (S) $2273
- — Z (S) $2273
1910.95 C01
- Issued
- Abate by
- Penalty
- Initial $3789.00 · Current $2580.00 Reduced
8111
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: Sharrett's Plating - On or about July 23, 2019, an employee working as an unloader at the end of the automated barrel line was exposed to an eight hour time weighted average of 87.4 decibels on the A weighted scale dBA and the employer had not included this person in a hearing conservation program. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2580
- — C (S) $3789
- — Z (S) $3789
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $3031.00 · Current $2062.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a). Sharretts Platting facility - On or about June 19, 2019, the employer did not develop energy control procedures for employees required to perform maintenance tasks involving electrical, hydraulic and pneumatic energy sources. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $2062
- — C (S) $3031
- — Z (S) $3031
1910.147 C07 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a). Sharretts Plating - On or about June 19, 2019, the employer did not provide training to either authorized nor affected employees to ensure that all employees understood the applicable requirements of energy control in the company. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $3031.00 · Current $2062.00 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a). Waste Water Treatment - On or about June 19, 2019, the employer did not provide an eyewash nor a shower for employees exposed to corrosive chemicals such as but not limited to sodium hydroxide that is used to raise the ph level in the tanks. b). Chemical Storage Area - On or about June 19, 2019, the employer did not provide an eyewash nor a shower for employees exposed to corrosive chemicals such as but not limited to muriatic acid and hydrogen peroxide to balance the ph levels in the tanks. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $2062
- — C (S) $3031
- — Z (S) $3031
1910.303 B01
- Issued
- Penalty
- Initial $2576.00 · Current $1751.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: a). Slitter Room - On or about June 29, 2019, the electrical boxes on the wall were open exposing live wires that were previously used for an overheard crane. No abatement certification or documentation required
Recent events (3)
- — F (S) $1751
- — C (S) $2576
- — Z (S) $2576
1910.215 A04
- Issued
- Penalty
- Initial $2576.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a). Sharretts Plating - Waste Water Treatment Area - On or about June 19, 2019, the 6 inch Skill bench grinder, model number 3396 was not equipment with a work rest. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $2576
- — Z (S) $2576
1910.215 B09
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a). Sharretts Plating - Waste Water Treatment Area - On or about June 19, 2019, the adjustable tongue guard was not present on the 6 inch Skill bench grinder, model number 3396, to prevent an impalement hazard to employees. No abatement certification or documentation required.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.36 G02
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points. a). Slitter Room - On or about June 19, 2019, the access to the exit route in the room was blocked with boxes and a scale that resulted in the access to the exit measuring at approximately 24 inches. No abatement certification or documentation required.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.132 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a). Sharretts Plating - On or about June 19, 2019, the employer did not certify the workplace personal protective equipment hazard assessment had been performed. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332813)
JEFFERSON, OH—2026-07-10
LAKE CITY PLATING LLC
WARSAW, IN—2026-07-08
SURFACE ENHANCEMENTS
KENT, WA—2026-07-06
WA317991930 - HYTEK FINISHES CO
PHOENIX, AZ—2026-06-24
CPX2026XTP177X0010 - FRONTIER GROUP, INC.
MELROSE PARK, IL—2026-06-24
NATIONAL PLATING SOLUTIONS LLC DBA SOMERVILLE PLATING
More inspections in PA
MILTON, PA—2026-07-10
HOMETOWN FOODS CHEF BOYARDEE CO.
SUNBURY, PA—2026-07-10
DEMPSEY UNIFORM & LINEN SUPPLY, INC
LANDISVILLE, PA—2026-07-10
FAIRVIEW DEMOLITION LLC
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
WILLIAMSPORT, PA—2026-07-10
INTERNATIONAL PAINT PROS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344094578.