Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JANZEN CONCRETE LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of JANZEN CONCRETE LLC in GO MACRO WAY, VIOLA, WI 54664 (NAICS 238110). OSHA activity number 344139928.

Watch Janzen Concrete LLC — free Get an email when a new federal OSHA severe-injury report for Janzen Concrete LLC is published. One employer, no account, unsubscribe in one click.
Establishment
JANZEN CONCRETE LLC
Site address
GO MACRO WAY
City
VIOLA
State
WI
ZIP
54664
Mailing
628 S. MAIN STREET, WESTBY, WI 54667
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
15
Ownership type
A

4 citations on file for this inspection.

1926.1153 C01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $2666.00 Reduced

Hazardous substances 9010

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.    Between the time frame of June 27, 2019 and July 03, 2019 one employee dry cut concrete  without following table 1 and not evaluating employees silica exposure.
Recent events (2)
  • — I (S) $2666
  • — Z (S) $5304

1926.1153 D02 I

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9015

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:     Between the time frame of June 27, 2019 and July 03, 2019 one employee dry cut concrete without following table 1 and not evaluating employees silica exposure.   An employee was permitted to perform outdoor concrete cutting operations on a sidewalk that was composed of crystalline silica containing materials including, but not limited to, Portland Cement compounds with a hand held gas powered saw and another employee were permitted to walk and work near the cutting area.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1153 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $2666.00 Reduced

Hazardous substances 9010

29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan tailored to the company does, complying with the requirements of 1926.1153(g)(1)(I) through (iv):    Between the time frame of June 27, 2019 and July 03, 2019 a written exposure control plan was not established and implemented for employees exposed to silica.
Recent events (2)
  • — I (S) $2666
  • — Z (S) $5304

1926.1153 I02 I

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $2666.00 Reduced

Hazardous substances 9010

29 CFR 1926.1153(i)(2)(i): The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of at least the information contained in paragraphs (i)(2)(i)(A)-(i)(2)(i)(F) of this standard.    Between the time frame of June 27, 2019 and July 03, 2019 one employee dry cut concrete and the employee did not understand the health hazards of silica.
Recent events (2)
  • — I (S) $2666
  • — Z (S) $5304

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344139928.