Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FORCE DYNAMICS INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of FORCE DYNAMICS INC. in 4995 VOORHEIS ROAD, TRUMANSBURG, NY 14886 (NAICS 333249). OSHA activity number 344202221.

Watch Force Dynamics INC. — free Get an email when a new federal OSHA severe-injury report for Force Dynamics INC. is published. One employer, no account, unsubscribe in one click.
Establishment
FORCE DYNAMICS INC.
Site address
4995 VOORHEIS ROAD
City
TRUMANSBURG
State
NY
ZIP
14886
Mailing
4995 VOORHEIS ROAD, TRUMANSBURG, NY 14886
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333249
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.212 A01

Serious Gravity 1 3 instances 1 exposed
Issued
Abate by
Penalty
Initial $1705.00 · Current $1279.00 Reduced
29 CFR 1910.212(a)(1):  Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts:   a) Assembly Area, on or about 8/7/19: Victor Lathe, the rotating chuck was not guarded.  b) Assembly Area, on or about 8/7/19:  Bridgeport Vertical Mill was not provided with a chuck and tool guard.   c) Assembly Area, on or about 8/7/19: Horizontal Band Saw was not protected with a guard on the unused portion of the blade on the right and left side.  d) Assembly Area, on or about 8/7/19: Belt Sander, the moving belt was not guarded.
Recent events (2)
  • — I (S) $1278.75
  • — Z (S) $1705

1910.219 D01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1705.00 · Current $1279.00 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  a)  Assembly Area, on or about 8/7/19:  The Belt Sander was not provided with a guard over the in-running nip points of the belt and pulley drive.
Recent events (2)
  • — I (S) $1278.75
  • — Z (S) $1705

1910.219 E01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):  a)  Assembly Area, on or about 8/7/19:  The Belt Sander was not provided with a guard over the in-running nip points of the belt and pulley drive.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 C01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) Assembly Area, on or about 8/7/19: A portable fire extinguisher was not mounted so that it was readily accessible.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View FORCE DYNAMICS INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344202221.