MARGARET, AL —
OSHA Inspection: JESUS CHAIDEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JESUS CHAIDEZ in LOT #1-38 STERLING PLACE, MARGARET, AL 35112 (NAICS 238140). OSHA activity number 344220355.
Where did this inspection happen?
- Establishment
- JESUS CHAIDEZ
- Site address
- LOT #1-38 STERLING PLACE
- City
- MARGARET
- State
- AL
- ZIP
- 35112
- Mailing
- 5127 LEE STREET DRIVE, BIRMINGHAM, AL 35242
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 2
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Penalty
- Initial $2898.00 · Current $2898.00
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) On or about 08/07/2019 - Lot #1-38 Sterling Place, Margaret, AL, employee(s) exposed to struck-by hazards from bricks stored on upper levels of the fabricated frame scaffolding were not wearing head protection.
Recent events (1)
- — Z (S) $2898
1926.300 B01
- Issued
- Abate by
- Penalty
- Initial $3410.00 · Current $3410.00
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: (a) On or about 08/07/2019 - Lot #1-38 Sterling Place, Margaret, AL, employee(s) operating a Dewalt circular saw with the guard tied back were exposed to the unguarded blade.
Recent events (1)
- — Z (S) $3410
1926.451 B01
- Issued
- Abate by
- Penalty
- Initial $2842.00 · Current $2842.00
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights is no: (a) On or about 08/07/2019 - Lot #1-38 Sterling Place, Margaret, AL, employee(s) were exposed to fall hazards of approximately 14 feet while working from fabricated frame scaffolding that was not fully planked.
Recent events (1)
- — Z (S) $2842
1926.451 E01
- Issued
- Abate by
- Penalty
- Initial $2842.00 · Current $2842.00
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access: (a) On or about 08/07/2019 - Lot #1-38 Sterling Place, Margaret, AL, employee(s) accessed the fabricated frame scaffolding by climbing the side of the scaffold.
Recent events (1)
- — Z (S) $2842
1926.451 G01
- Issued
- Abate by
- Penalty
- Initial $3978.00 · Current $3978.00
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level: (a) On or about 08/07/2019 - Lot #1-38 Sterling Place, Margaret, AL, employee(s) working from fabricated frame scaffolding were not protected from falls of approximately 14 feet.
Recent events (1)
- — Z (S) $3978
1926.454 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: (a) On or about 08/07/2019, Lot #1-38 Sterling Place, Margaret, AL, employee(s) conducting work from fabricated frame scaffolding had not been trained.
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) (a) On or about 07/17/2019 - Lot #1-38 Sterling Place, Margaret, AL, a written hazard communication program had not been developed and implemented for employees working with hazardous chemicals including, but not limited to, ACME Brick Lite Buff Type N Cement.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 238140)
RENO, NV—2026-07-16
DC MASONRY
WINNETKA, IL—2026-07-15
CHICAGO STUCCO CO.
LODI, NJ—2026-07-15
J & O MASONRY CONTRACTORS
DORAVILLE, GA—2026-07-14
SUDLOW CONCRETE, INC.
FLAGLER BEACH, FL—2026-07-14
PLANET DESIGN SERVICES, INC.
More inspections in AL
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
LOXLEY, AL—2026-07-16
CARLOS CHE
TRUSSVILLE, AL—2026-07-16
ALL SOUTH STEELWORX, LLC
CLANTON, AL—2026-07-14
C & S CANOPY, INC.
BIRMINGHAM, AL—2026-07-14
SCHOLAR CRAFT PRODUCTS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344220355.