OSHA Inspection: NETWORK RECYCLING GROUP LLC

Issued

2019-11-25 00:00:00

Abate by

2019-12-20 00:00:00

Penalty

Initial $2842.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  At 402 Highway 28 in Bland, MO 65014 - On or about 08/22/2019, employees were exposed to the hazard of being caught in the point-of-operation or contacted by rotating parts while changing out saw blades on pallet dismantling saws ("Green" and "Yellow", Model / Serial No. unavailable) and the employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was isolated from the energy source and rendered inoperative.

Issued

2019-11-25 00:00:00

Abate by

2020-01-14 00:00:00

Penalty

Initial $2842.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  At 402 Highway 28 in Bland, MO 65014 - On or about 08/22/2019, employees were exposed to struck-by or struck-against hazards where employees were operating a "Hyster" (Model No. S60FT, Serial No. F187V24386L) powered industrial truck (PIT) and the employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).

Issued

2019-11-25 00:00:00

Abate by

2020-01-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck:  At 402 Highway 28 in Bland, MO 65014 - On or about 08/22/2019, employees were exposed to struck-by or struck-against hazards where employees were operating a "Hyster" (Model No. S60FT, Serial No. F187V24386L) powered industrial truck (PIT) and the employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck.