OSHA Inspection: TILE REDI, INC.

Issued

2020-01-31 00:00:00

Abate by

2020-02-27 00:00:00

Penalty

Initial $6747.00 · Current $4722.00 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    On or about September 12, 2019, at 4450 NW 126 Avenue, Coral Springs, Florida, 33065, employees were operating a sliding table saw (circular hand-fed ripsaw), which was not equipped with an operable automatically adjusting hood or guard, to cut wood material, which was then used to make mock-up shower enclosures and shipping crates; therefore exposing the employees to amputation hazards.    NOTE: CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.

Issued

2020-01-31 00:00:00

Abate by

2020-02-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  On or about September 12, 2019, at 4450 NW 126 Avenue, Coral Springs, Florida, 33065, employees were operating a sliding table saw (circular hand-fed ripsaw), which was not equipped with a spreader for cutting wood material, which was then used to make mock-up shower enclosures and shipping crates; therefore exposing the employees to amputation hazards.  NOTE: CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.

Issued

2020-01-31 00:00:00

Abate by

2020-02-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  On or about September 12, 2019, at 4450 NW 126 Avenue, Coral Springs, Florida, 33065, employees were operating a circular hand-fed ripsaw (table saw), which was not equipped with a non-kickback fingers (dogs), for cutting wood material, which was then used to make mock-up shower enclosures and shipping crates; therefore exposing the employees to amputation hazards.  NOTE: CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.

Issued

2020-01-31 00:00:00

Abate by

2020-02-27 00:00:00

Penalty

Initial $1350.00 · Current $945.00 Reduced

General-duty citation text

29 CFR 1904.29(b)(3): Each recordable injury or illness on the OSHA 300 Log and 301 Incident Report was not recorded within seven (7) calendar days of receiving information that a recordable injury or illness has occurred:    b. On or about October 8, 2018, at 4450 NW 126 Avenue, Coral Springs, Florida, 33065, the employer did not record a recordable injury on the OSHA 300 log and the OSHA 301 Incident Report within (7) seven calendar days of receiving information that a recordable injury or illness has occurred.    NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.

Issued

2020-01-31 00:00:00

Abate by

2020-02-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.31(a): Recordable injuries and illnesses of all company employees including labor, executive, hourly, salary, part-time, seasonal, or migrant workers and employees who were not on the company payroll but supervised by the employer were not recorded on the OSHA 300 log:    b. On or about October 8, 2018, at 4450 NW 126 Avenue, Coral Springs, Florida, 33065, the employer did not record all recordable work-related injuries and illnesses on the OSHA Forms 300, 300A, and 301, for the preceding (5) five calendar years, of all company employees including labor, executive, hourly, salary, part-time, seasonal, or migrant workers and employees who were not on the company payroll but who supervised by the employer.          NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.