SACO, ME —
OSHA Inspection: SHED HAPPENS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SHED HAPPENS, INC. in 730 PORTLAND ROAD, SACO, ME 04072 (NAICS 321992). OSHA activity number 344308697.
Where did this inspection happen?
- Establishment
- SHED HAPPENS, INC.
- Site address
- 730 PORTLAND ROAD
- City
- SACO
- State
- ME
- ZIP
- 04072
- Mailing
- 730 PORTLAND ROAD, SACO, ME 04072
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321992
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 B03
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $750.00 Reduced
General-duty citation text
29 CFR 1910.213(b)(3): Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after power failure: Shop - The 10" Delta table saw was not equipped with a device to prevent restarting upon restoration of power after a power failure.
Recent events (3)
- — F (S) $750
- — C (S) $5304
- — Z (S) $5304
1910.213 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: Shop - The table saw was not equipped with an automatically adjusting hood guard.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $750.00 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut: Shop - The Delta X radial arm saw did not have a guard over the lower exposed portion of the blade.
Recent events (3)
- — F (S) $750
- — C (S) $5304
- — Z (S) $5304
1910.213 H04
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: Shop - The Delta X radial arm saw was not installed in a manner to cause the saw to return to the starting position when released.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 A02 X
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points: Outside the shop - An extension cord used to power a diesel pump was run across the facility's driveway, exposing it to damage from vehicular traffic.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 321992)
NAVASOTA, TX—2026-06-26
CHAMPION HOME BUILDERS, INC.
EAST MONTPELIER, VT—2026-06-18
HUNTINGTON HOMES, INC.
HUDSON, WI—2026-06-12
US LBM HOLDINGS, LLC
WAYNE, NE—2026-06-03
HERITAGE HOMES OF NEBRASKA INC
MOUNT JULIET, TN—2026-05-21
OLD TIMERS LOG HOMES & SUPPLY INC.
More inspections in ME
PORTLAND, ME—2026-07-06
NEW ENGLAND REHABILITATION HOSPITAL OF PORTLAND
DOVER FOXCROFT, ME—2026-07-06
SHAW'S SUPERMARKETS
GORHAM, ME—2026-07-02
TOWN OF GORHAM
FARMINGTON, ME—2026-07-02
MCTA GENERAL CONSTRUCTION CORP
FARMINGTON, ME—2026-07-02
JC HOME IMPROVEMENT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344308697.