PARKER, CO —
OSHA Inspection: WILLIAMMRK MASONRY, LLC
Unprogrammed Other inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Other health inspection of WILLIAMMRK MASONRY, LLC in 19920 HILLTOP ROAD, PARKER, CO 80134 (NAICS 238140). OSHA activity number 344323571.
Where did this inspection happen?
- Establishment
- WILLIAMMRK MASONRY, LLC
- Site address
- 19920 HILLTOP ROAD
- City
- PARKER
- State
- CO
- ZIP
- 80134
- Mailing
- 10940 S PARKER ROAD, #616, PARKER, CO 80134
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1153 C01
- Issued
- Abate by
- Penalty
- Initial $3789.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section: 1) On September 19, 2019, and at prior times, employees used portable stationary masonry saws to cut masonry blocks. The employer did not ensure employees used saws equipped with integrated water delivery systems, per the engineering and work practice controls listed in table 1.
Recent events (2)
- — I (S) $0
- — Z (S) $3789
1926.1153 D02 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: 1) On September 19, 2019, and at prior times, employees used portable and stationary masonry saws to cut masonry blocks. The employer was not following the control measures listed in table 1 of this standard, and did not assess the respirable crystalline silica exposure of the employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: 1) On September 19, 2019, and at prior times, employees used portable and stationary masonry saws to cut masonry blocks. The employer had not implemented an exposure control plan, including the elements required by paragraph (g)(1)(i) through (g)(1)(iv) of this section.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G04
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $1895.00
General-duty citation text
29 CFR 1926.1153(g)(4): The employer did not designate a competent person to make frequent and regular inspections of job sites, materials, and equipment to implement the written exposure control plan: 1) On September 19, 2019, and at prior times, employees used portable and stationary masonry saws to cut masonry blocks. The employer had not designated a competent person who had the knowledge and authorization to take prompt corrective measures and to implement required engineering controls.
Recent events (2)
- — I (S) $1894.5
- — Z (S) $0
1926.1153 I01
- Issued
- Abate by
- Penalty
- Initial $3789.00 · Current $1895.00 Reduced
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not ensure that each employee is trained in accordance with the provisions of the Hazard Communication Standard and paragraph (i)(2) of this section: 1) On September 19, 2019, and at prior times, employees used portable and stationary masonry saws to cut masonry blocks. The employer did not ensure employees were aware of crystalline silica content in the masonry blocks and did not ensure that employees knew which tasks in the workplace could result in exposure to respirable crystalline silica.
Recent events (2)
- — I (S) $1894.5
- — Z (S) $3789
More inspections in this industry (NAICS 238140)
RENO, NV—2026-07-16
DC MASONRY
WINNETKA, IL—2026-07-15
CHICAGO STUCCO CO.
LODI, NJ—2026-07-15
J & O MASONRY CONTRACTORS
DORAVILLE, GA—2026-07-14
SUDLOW CONCRETE, INC.
FLAGLER BEACH, FL—2026-07-14
PLANET DESIGN SERVICES, INC.
More inspections in CO
BROOMFIELD, CO—2026-07-16
WAVELYNX TECHNOLOGIES LLC
COLORADO SPRINGS, CO—2026-07-15
ELMER CONTRACTOR LLC
SHERIDAN, CO—2026-07-15
JOHN'S COLLISION REPAIR, INC.
CENTENNIAL, CO—2026-07-15
BRAKES PLUS, INC
ENGLEWOOD, CO—2026-07-15
PCL CIVIL CONSTRUCTORS INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344323571.