1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: SHEETZ, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of SHEETZ, INC. in 242 SHEETZ WAY, CLAYSBURG, PA 16625 (NAICS 493120). OSHA activity number 344358015.

Watch Sheetz, INC. — free Get an email when a new federal OSHA severe-injury report for Sheetz, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SHEETZ, INC.
Site address
242 SHEETZ WAY
City
CLAYSBURG
State
PA
ZIP
16625
Mailing
242 SHEETZ WAY, CLAYSBURG, PA 16625
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493120
Employees
300
Ownership type
A

4 citations on file for this inspection.

1910.119 D03 II

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5783.00 · Current $4400.00 Reduced
29 CFR 1910.119(d)(3)(ii): The employer did not document that equipment complies with recognized and generally accepted good engineering practices.    (a) In the Machinery Room, 242 Sheetz Way, Claysburg, PA: On or about October 4, 2019, ammonia service hoses were not so marked to include an expiration date stenciled onto the hose.
Recent events (2)
  • — I (O) $4400
  • — Z (S) $5783

1910.119 F01 III B

Other-than-serious 4 instances 2 exposed
Issued
Abate by
Penalty
Initial $5783.00 · Current $4400.00 Reduced

Hazardous substances 0170

29 CFR 1910.119(f)(1)(iii)(B): The employer's Standard Operating Procedures did not include precautions necessary to prevent exposure, including engineering controls, administrative controls, and personal protective equipment;    a) At the facility, on or about October 18, 2019 - The employer's written operating procedure HTR +17 Oil Pot, did not address the use of appropriate hand protection in the form of chemical-resistant, impervious gloves to prevent skin contact with ammonia.    b) At the facility, on or about October 18, 2019 - The employer's written operating procedure NH3 Pump P-2, did not address the use of appropriate hand protection in the form of chemical-resistant, impervious gloves to prevent skin contact with ammonia.    c) At the facility, on or about October 18, 2019 - The employer's written operating procedure LTR -25 Oil Pot, did not address the use of appropriate hand protection in the form of chemical-resistant, impervious gloves to prevent skin contact with ammonia.    d) At the facility, on or about October 18, 2019 - The employer's written operating procedure Air Handling Unit AHU #101.1, did not address the use of appropriate hand protection in the form of chemical-resistant, impervious gloves to prevent skin contact with ammonia.
Recent events (2)
  • — I (O) $4400
  • — Z (S) $5783

1910.138 A

Serious Gravity 1 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 0170

29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes.  a) In the Machinery Room, on or about September 18, 2019 - The employer did not require employees to use appropriate hand protection while draining oil pots exposing their hands to skin contact with ammonia. Employees wore Ironclad WWX2 gloves while draining oil pots.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.119 J02

Deleted Serious Gravity 1 2 instances 2 exposed
Issued
Penalty
Initial $5783.00 · Current $0.00 Reduced

Hazardous substances 0170

29 CFR 1910.119(j)(2): The employer did not implement written procedures to maintain the on-going integrity of process equipment:  a) In the Engine Room, on or about October 4, 2019 - The employer did not implement their written Mechanical Integrity Program by not implementing the Mechanical Integrity Schedule of HTR +17. The employer did not implement the Mechanical Integrity Schedule of HTR +17 by not having a Independent Full Inspection performed by a qualified contractor at least every five years.  b) In the Engine Room, on or about October 4, 2019 - The employer did not implement their written Mechanical Integrity Program by not implementing the Mechanical Integrity Schedule of LTR -25. The employer did not implement the Mechanical Integrity Schedule of LTR -25 by not having a Independent Full Inspection performed by a qualified contractor at least every five years.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5783

View SHEETZ, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344358015.