Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PORFIRIO MACIAS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PORFIRIO MACIAS in 22807 AVON STREET, SAN ANTONIO, TX 78258 (NAICS 236116). OSHA activity number 344368618.

Watch Porfirio Macias — free Get an email when a new federal OSHA severe-injury report for Porfirio Macias is published. One employer, no account, unsubscribe in one click.
Establishment
PORFIRIO MACIAS
Site address
22807 AVON STREET
City
SAN ANTONIO
State
TX
ZIP
78258
Mailing
5772 GREYROCK DR., SAN ANTONIO, TX 78228
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
3
Ownership type
A

6 citations on file for this inspection.

1926.59

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2842.00 · Current $2842.00
29 CFR 1926.59:  The employer had not developed a written hazard communication program in accordance with 29 CFR 1910.1200 as incorporated by reference:  29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  On or about October 10, 2019, and at times prior thereto, employees were exposed to respiratory hazards while operating a cement mixer machine without implementing a hazard communication program to train employees on the properties of silica found in Lehigh White Masonry Cement.
Recent events (1)
  • — Z (S) $2842

1926.102 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1705.00 · Current $1705.00
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles.  On or about October 10, 2019, and at times prior thereto, employees were exposed to a struck-by flying projectile hazard, while using a cement mixer machine and a Dewalt Circular Saw without safety glasses.
Recent events (1)
  • — Z (S) $1705

1926.451 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3410.00 · Current $3410.00
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary:   On or about October 10, 2019, and at times prior thereto, employee was exposed to a fall hazard to the dirt ground below while working from a scaffold which was not fully planked.
Recent events (1)
  • — Z (S) $3410

1926.451 G01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  On or about October 10, 2019, and at times prior thereto, employees were exposed to a fall hazard over 10 feet high while performing masonry work from a scaffold without fall protection and/or guardrail system.
Recent events (1)
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3410.00 · Current $3410.00
29 CFR 1926.454(a): The employer did not have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:     On or about October 10, 2019, and at times prior thereto, employees were exposed to a fall hazard, while performing masonry work from a tubular scaffold without being trained on fall hazard recognition.
Recent events (1)
  • — Z (S) $3410

1926.1060 A

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1705.00 · Current $1705.00
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:   On or about October 10, 2019, and at times prior thereto, employees were exposed to a fall hazard while using a Werner 8 ft. extension ladder for access and egress on a tubular scaffold.
Recent events (1)
  • — Z (S) $1705

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344368618.