OSHA Inspection: ALUDYNE, LLC

Issued

2019-11-05 00:00:00

Abate by

2019-12-06 00:00:00

Penalty

Initial $7577.00 · Current $5683.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation;    a) On or about 10/10/19 throughout the facility; employees regularly enter robot work envelopes to perform service and maintenance activities, such as but not limited to, removing jammed parts, clean the area, adjusting sensors and were exposed to potential struck by hazards when they were not trained as Authorized employees.    ABATEMENT CERTIFICATION REQUIRED

Issued

2019-11-05 00:00:00

Abate by

2019-12-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  a) On or about 10/10/19 throughout the facility; employees regularly enter robot work envelopes to perform service and maintenance activities, such as but not limited to, removing jammed parts, clean the area, adjusting sensors and were exposed to potential struck by hazards when locks were attached to category 2 interlock devices.      ABATEMENT CERTIFICATION REQUIRED

Issued

2019-11-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not used for lockout and tagout purposes only:  a) On or about 10/10/19 in the knuckle cell area; employees loaded parts onto a conveyor inside a robot work envelope and were exposed to a potential struck by hazards when a lock, identified for use in the site control of hazardous energy program, was applied by the Maintenance Manager for use as a long term lock out on machine 2268 Vigel/robot.   NO ABATEMENT CERTIFICATION REQUIRED