Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

HATCHECHUBBEE, AL —

OSHA Inspection: DUDLEY HARDWOODS, LLC

Complaint inspection · Safety discipline

At a glance

On , OSHA opened a complaint safety inspection of DUDLEY HARDWOODS, LLC in 687 HIGHWAY 26, HATCHECHUBBEE, AL 36858 (NAICS 321113). OSHA activity number 344383146.

Watch Dudley Hardwoods, LLC — free Get an email when a new federal OSHA severe-injury report for Dudley Hardwoods, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
DUDLEY HARDWOODS, LLC
Site address
687 HIGHWAY 26
City
HATCHECHUBBEE
State
AL
ZIP
36858
Mailing
PO BOX 187, HATCHECHUBBEE, AL 36858

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
321113
Employees
30
Ownership type
A

Citations

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $9282.00 · Current $6000.00 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed struck-by and amputation hazards when changing the blade on the Brewco B-1600 Run-Around System / Resaw Machine:  a)  Brewco B-1600 Run-Around System / Resaw Machine: On or about October 16, 2019 and at times prior, the employer exposed employees to struck-by and amputation hazards, in that the employer failed to require two personnel to change the blade on the Brewco B-1600 Run-Around System / Resaw Machine as required by the manufacturer.
Recent events (2)
  • — I (S) $6000
  • — Z (S) $9282

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $5636.00 · Current $3500.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a)  Brewco B-1600 Run-Around System / Resaw Machine: On or about October 16, 2019 and at times prior, employees were exposed to struck-by and amputation hazards, when performing servicing, setup, and maintenance activities on equipment which had hydraulic, pneumatic and electrical energy sources, in that employees were allowed to change the blade on the Brewco B-1600 Run-Around System / Resaw Machine without developing, documenting and utilizing energy control procedures to prevent accidental startup of the machine.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5636

1910.147 C07 I A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Each authorized employee had not received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:   a)  Brewco B-1600 Run-Around System / Resaw Machine: On or about October 16, 2019 and at times prior, employees were exposed to struck-by and amputation hazards, when performing servicing, setup, and maintenance activities on equipment which had hydraulic, pneumatic and electrical energy sources, in that each operator had not received authorized lockout/tagout training prior to being allowed to change the blade on the Brewco B-1600 Run-Around System / Resaw Machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 F03 II D

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment:  a)  Brewco B-1600 Run-Around System / Resaw Machine: On or about October 16, 2019 and at times prior, employees were exposed to struck-by and amputation hazards, when performing servicing, setup, and maintenance activities on equipment which had hydraulic, pneumatic and electrical energy sources, in that each authorized employee did not affix a lock prior to being allowed to change the blade on the Brewco B-1600 Run-Around System / Resaw Machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C05 II

Other-than-serious 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii): Lockout/Tagout devices shall be the only devices used for controlling energy, shall not be used for other purposes and meet the requirements of 1910.147(c)(5)(ii) [A] thru 1910.147(c)(5)(ii)[D]:  a)  Brewco B-1600 Run-Around System / Resaw Machine: On or about October 16, 2019 and at times prior, employees were exposed to struck-by and amputation hazards, when performing servicing, setup, and maintenance activities on equipment which had hydraulic, pneumatic and electrical energy sources, in that employees were allowed to use lockout/tagout devices that did not identify the employee who applied the lock as required by 1910.147(c)(5)(ii)[D].
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.151 C

Deleted Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.151(c): Where the eyes of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes were not available for immediate emergency use:  a) Wood treatment/ dip tank area:  On October 16, 2019, and at times prior, the employer exposed employees to eye and face injuries in that the employer did not provide an eyewash station for quick drenching or flushing when using corrosive chemicals such as NexGen and NexBright.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections at DUDLEY HARDWOODS, LLC

View DUDLEY HARDWOODS, LLC's full OSHA safety record →

More inspections in this industry (NAICS 321113)

More inspections in AL

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344383146.