OSHA Inspection: JH CONSTRUCTION, INC.

Issued

2020-05-05 00:00:00

Abate by

2020-05-11 00:00:00

Penalty

Initial $1735.00 · Current $1735.00

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) Ground Level - Employees were working below roofers where wood, tools, and other materials could fall, and were not provided with head protection, on or about 11/05/2019.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).

Issued

2020-05-05 00:00:00

Penalty

Initial $1735.00 · Current $1735.00

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a) Ground Level - An employee was using a Makita portable electric circular saw, model number 5007F, serial number 1854909, to cut 1x8 inch wood sub roofing material and not wearing eye protection, on or about 11/05/2019.  No abatement certification or documentation required for this item.

Issued

2020-05-05 00:00:00

Abate by

2020-05-11 00:00:00

Penalty

Initial $2313.00 · Current $2313.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a) Roof - Employees using repelling equipment instead of a personal fall arrest system were exposed to an approximately 21 foot fall hazard while performing roofing operations on a steep roof with a 8/10 slope, on or about 11/05/2019.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).

Issued

2020-05-05 00:00:00

Abate by

2020-05-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) Roof - Employees using repelling equipment instead of a personal fall arrest system were exposed to an approximately 21 foot fall hazard while performing roofing operations on a steep roof with a 8/10 slope, on or about 11/05/2019.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).