OSHA Inspection: TNT SERVICES, INC.

Issued

2019-12-09 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $6819.00 · Current $4091.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  a. On or about November 7, 2019, the employer did not ensure that employees who were permitted to operate forklifts were provided with forklift training.

Issued

2019-12-09 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $11934.00 · Current $7160.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.  a. On or about October 27, 2019, the employer did not ensure that the belt and pulley which was located on the power washer on Truck # 173 was guarded, which exposed employees to amputation hazards.

Issued

2019-12-09 00:00:00

Abate by

2020-01-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.38(a): Application. An employer must have an emergency action plan whenever an OSHA standard in this part requires one. The requirements in this section apply to each such emergency action plan.  a. On or about November 7, 2019, the employer did not develop and implement an emergency action plan.