Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

LEES SUMMIT, MO —

OSHA Inspection: PBAJ MANAGEMENT LLC

Complaint inspection · Health discipline

At a glance

On , OSHA opened a complaint health inspection of PBAJ MANAGEMENT LLC in 801 NW COMMERCE DRIVE, LEES SUMMIT, MO 64086 (NAICS 332812). OSHA activity number 344433545.

Watch Pbaj Management LLC — free Get an email when a new federal OSHA severe-injury report for Pbaj Management LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
PBAJ MANAGEMENT LLC
Site address
801 NW COMMERCE DRIVE
City
LEES SUMMIT
State
MO
ZIP
64086
Mailing
801 NW COMMERCE DRIVE, LEES SUMMIT, MO 64086

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332812
Employees
54
Ownership type
A

Citations

6 citations on file for this inspection.

1910.134 C

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $8096.00 · Current $5667.00 Reduced

General-duty citation text

29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use:    At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, the employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use.
Recent events (2)
  • — I (S) $5667
  • — Z (S) $8096

1910.215 A04

Deleted Serious Gravity 5 4 instances 2 exposed
Issued
Abate by
Penalty
Initial $5398.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:  At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, employees were exposed to rotating grinding wheel hazards when the grinding wheels in the bench jeweler stations did not have a work rest to support offhand grinding work.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5398

1910.215 B09

Deleted Serious Gravity 5 4 instances 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:   At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, employees were exposed to rotating grinding wheel hazards when the grinding wheels in the bench jeweler stations did not have a tongue guard installed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $4588.00 · Current $2294.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.      At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, employees were exposed electrical hazards when an extension cord was plugged into power strip which was powering various electrical equipment such as computers and an air compressor.
Recent events (2)
  • — I (S) $2294
  • — Z (S) $4588

1910.1000 A02

Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $8096.00 · Current $5667.00 Reduced

Hazardous substances 2240

General-duty citation text

29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Silver (Ag) listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of  .01 mg/m3.     At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, employees were exposed to an airborne concentration in excess of the Time Weighted Average for Silver (Ag).    a) An employee working in the bench jeweler area was exposed to an 8 hour time weighted average (TWA) level of .21 mg/m3, which is 21.442 times the OSHA permissible exposure level (PEL) of .01 mg/m3.    b) An employee working in the laser engraving area was exposed to an 8 hour time weighted average (TWA) level of .014 mg/m3, which is 1.43 times the OSHA permissible exposure level (PEL) of .01 mg/m3.
Recent events (2)
  • — I (S) $5667
  • — Z (S) $8096

1910.1000 E

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $8096.00 · Current $5667.00 Reduced

Hazardous substances 2240

General-duty citation text

29 CFR 1910.1000(e): Feasible administrative or engineering controls are not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d) and protective equipment or any other protective measures are not used to keep the exposure of employee to air contaminants within the limits prescribed:      At a worksite located at 801 NW Commerce Drive, Lees Summit, MO, air monitoring was not consulted to determine effectiveness of administrative/engineering controls when employees were exposed to airborne concentrations of metals generated from the jewelry engraving/polishing process.
Recent events (2)
  • — I (S) $5667
  • — Z (S) $8096

More inspections in this industry (NAICS 332812)

AMBRIDGE, PA—2026-06-24

CENTRIA

More inspections in MO

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344433545.