OSHA Inspection: CECILIO ASENSIO NU?EZ

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $2273.00 · Current $1137.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:    a) At the jobsite, on or about November 7, 2019, the employer did not ensure that employees wore head protection while exposed to being struck on the head by materials and tools during wood framing activities.

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $1705.00 · Current $933.00 Reduced

General-duty citation text

29 CFR 1926.405(j)(2)(ii): A receptacle installed in a wet location was not designed for the location:    a) At the jobsite, on or about November 7, 2019, duplex electrical receptacles with missing weatherproof covers mounted on the temporary power pole were used to provide power to and air compressor and powered hand tools (e.g. circular saws), exposing employees to electrical shock and burn hazards.

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $2842.00 · Current $1425.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    a) At the jobsite, on or about November 7, 2019, the employer did not ensure that an employee working on upper levels while performing wood framing activities used fall protection, resulting in fall hazards of up to 17.6 feet.

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) At the jobsite, on or about November 7, 2019, the employer did not provide fall protection training to an employee exposed to fall hazards of up to 17.6 feet while working on upper levels during wood framing activities.

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $2842.00 · Current $1425.00 Reduced

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:    a) At the jobsite, on or about November 7, 2019, the employer did not ensure that employees worked safely from ladders in that an employee stood on the top step of an 6 ft. A-frame step ladder to gain access to the second working level during wood framing activities, resulting in a fall hazard of up to 6 ft. onto concrete floor.

Issued

2019-11-29 00:00:00

Abate by

2019-12-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.  a) At the jobsite, on or about November 7, 2019, the employer did not provide ladder safety training to an employee performing wood framing activities, exposing the employee to fall hazards.