CORPUS CHRISTI, TX —
OSHA Inspection: PREMIER SHIELDING COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of PREMIER SHIELDING COMPANY in 310 CENTAURUS ST, CORPUS CHRISTI, TX 78405 (NAICS 339991). OSHA activity number 344477518.
Where did this inspection happen?
- Establishment
- PREMIER SHIELDING COMPANY
- Site address
- 310 CENTAURUS ST
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78405
- Mailing
- P.O. BOX 270717, CORPUS CHRISTI, TX 78427
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339991
- Employees
- 14
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 II
- Issued
- Abate by
- Penalty
- Initial $3856.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: On or about November 26, 2019, and at times prior thereto, at this facility, an employee operated a forklift and had not received the required training.
Recent events (2)
- — I (S) $1000
- — Z (S) $3856
1910.178 Q07
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: On or about November 26, 2019, and at times prior thereto, at this facility, the employer's forklift was not inspected prior to its use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Penalty
- Initial $2313.00 · Current $500.00 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about November 26, 2019 at the east end of the shop, the employer did not ensure tongue guards on a pedestal grinder were adjusted properly.
Recent events (2)
- — I (S) $500
- — Z (S) $2313
1910.157 C01
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: On or about November 26, 2019, in the main entrance to the office, the employer did not identify the location of a fire extinguisher.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E03
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: At this location, portable fire extinguishers were not annually inspected.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): On our about November 26, 2019, and at times prior thereto, at this facility, employees used hazardous chemicals, such as but not limited to, acetone, methanol, and solder to manufacture gaskets and shielding products. The employer did not developed a program which would address labeling and other forms of warning on chemical containers, Safety Data Sheets, and employee information and training on the hazards associated with chemicals used at this site. The written program must also contain the following: 1. A list of all hazardous chemicals on site; 2. The methods the employer will use to inform employees of the hazards associated with non-routine tasks involving chemicals, such as spill; 3. The hazards of chemicals contained in piping that is not labeled; and, 4. The method the employer will use to inform other employers (contractors) of the chemicals their employees might be exposed to while performing duties at this site.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 339991)
NECEDAH, WI—2026-06-29
FREUDENBERG LIMITED PARTNERSHIP
CRANE, IN—2026-06-29
MANTECH ADVANCED SYSTEMS INTERNATIONAL INC.
CHARLOTTE, NC—2026-06-26
161437 - MUELLER DIE CUT SOLUTIONS, LLC
WILSONVILLE, OR—2026-06-08
317744433 - KLINGER IGI INC
CARVER, MN—2026-06-04
111369 - LAKEVIEW INDUSTRIES, INC
More inspections in TX
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
FORT WORTH, TX—2026-07-10
RC PROFESSIONAL ROOFING OF TEXAS LLC
CYPRESS, TX—2026-07-10
FEDERICO CARVAJAL GARCIA
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
SAN ANTONIO, TX—2026-07-09
WAREHOUSE RACK COMPANY, LP
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344477518.