OSHA Inspection: TIRES & ACCESSORIES YADHIRA, INC.

Issued

2020-05-06 00:00:00

Abate by

2020-06-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.244(a)(1)(ii): Rated load(s) of portable jack(s) were not legibly and permanently marked in a prominent location on the jack(s) by casting, stamping, or other suitable means:  a)  On or about December 5, 2019, at the vehicle maintenance shop, several floor jacks, such as two Pittsburgh Automotive Heavy Duty brand and two Daytona brand were lacking the required load rating of 3 TON, exposing employees to caught-under and crush-by hazards.

Issued

2020-05-06 00:00:00

Abate by

2020-06-02 00:00:00

Penalty

Initial $4048.00 · Current $4048.00

General-duty citation text

29 CFR 1910.244(a)(2)(iii): Loads were not cribbed, blocked or otherwise secured immediately after being raised with a jack:  a)  On or about November 9, 2019, at the worksite located at 2800 9th St. W. Bradenton, Florida, the employer did not ensure that an employee working beneath a lifted vehicle with jack stands, had blocked/chocked the back tires and applied the vehicle parking brake, exposing the employee to struck-by/crush-by hazards.

Issued

2020-05-06 00:00:00

Abate by

2020-06-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances 181020372460

General-duty citation text

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) On or about December 5, 2019, at the auto shop, the employer failed to develop and implement a written hazard communication program for employees handling hazardous materials such as bead sealer, vulcanizing fluid and engine oil, exposing them to chemical hazards.

Issued

2020-05-06 00:00:00

Abate by

2020-06-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances 181020372460

General-duty citation text

29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a) On or about December 5, 2019, at the auto shop, the employer had not trained employees on the hazards of the chemicals they used, such as bead sealer, vulcanizing fluid and engine oil, exposing employees to inhalation hazards and chemical burns.

Issued

2020-05-06 00:00:00

Abate by

2020-06-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances 181020372460

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On or about December 5, 2019, at the auto shop, the employer had not trained employees on the hazards of the chemicals they used, such as bead sealer, vulcanizing fluid and engine oil, exposing employees to inhalation hazards and chemical burns.

Issued

2020-05-06 00:00:00

Abate by

2020-06-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.39(a)(1): The employer did not report within 8-hours the death of an employee resulting from a work-related incident:  a) On or about November 9, 2019, at the worksite located at 2800 9th St. W. Bradenton, Florida, the employer did not report a work-related death to OSHA within 8-hours.

Issued

2020-05-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  a) On or about December 5, 2019, at the auto shop, employees were exposed to an electrical hazard, in that, the junction box of the Champion Advantage 7.5 HP Air Compressor (80 Gallon 208-230/460 Volt, 3-Phase) had no cover.

Issued

2020-05-06 00:00:00

Abate by

2020-06-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:  a) On or about December 5, 2019, at the auto shop, the power cord into and out the junction box of the Champion Advantage 7.5 HP Air Compressor (80 Gallon 208-230/460 Volt, 3-Phase) had no strain relief. b) On or about December 5, 2019, at the auto shop, the extension cord used to energize the Champion Advantage 7.5 HP Air Compressor (80 Gallon 208-230/460 Volt, 3-Phase) had no strain relief.   b) On or about December 5, 2019, at the auto shop, the extension cord used to energize the Champion Advantage 7.5 HP Air Compressor (80 Gallon 208-230/460 Volt, 3-Phase) had no strain relief.