OSHA Inspection: LOGAN RUN WELDING

Issued

2021-01-07 00:00:00

Abate by

2021-05-17 00:00:00

Penalty

Initial $325.00 · Current $325.00

General-duty citation text

29 CFR  1903.19(c)(1):The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Location: Facility-  On or about January 7, 2021, the employer did not certify that abatement had been completed for Citation 1 Item 1a, Citation 1 Item 1b, Citation 1 Item 1c, Citation 1 Item 2, Citation 1 Item 3, Citation 2 Item 1 and Citation 2 Item 2.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $1475.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    a) Production area/Yard: The employer did not certify that each powered industrial truck (forklift) operator has been trained and evaluated as required by paragraph (l), on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:    a) Production area: The Hyster H80XL2 forklift was equipped with poorly functioning brakes, as observed on or about December 18, 2019.    b) Production area/yard: The Hyster H155XL2 forklift was missing the driver compartment floor board, as observed on or about December 18, 2019.    c) Production area/yard: The Mitsubishi forklift had a missing horn, missing/broken gas pedal and the tips of the forks were damaged/broken off, as observed on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:    a) Production area/Yard: Powered industrial trucks (forklifts) were not examined before being placed in service in that each of the forklifts were in need of repair but being operated, as observed on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $1966.00 · Current $1440.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a) Production area: The point of operation on the Adira hydraulic press brake was not guarded, as observed on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $1475.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4):    a) Production area: Portable angle grinders (2) were used to grind metal pieces and were not equipped with safety guards, as observed on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2021-05-17 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:    a) Production area: Overhead cranes and hoists did not receive periodic complete inspections at intervals defined in this section, on or about December 18, 2019.    Abatement Certification Required.

Issued

2020-03-31 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half hour:    a) Production area: Oxygen cylinders were in storage with acetylene (fuel gas) cylinders and forklift fuel propane cylinders, as observed on or about December 18, 2019.    Abatement Certification Required.