Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: HU-B'S OFFSHORE MARINE SALES AND SERVICE

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HU-B'S OFFSHORE MARINE SALES AND SERVICE in 1200 PORT AUTHORITY RD, EDDYVILLE, KY 42038 (NAICS 811490). OSHA activity number 344566989.

Watch Hu-B'S Offshore Marine Sales AND Service — free Get an email when a new federal OSHA severe-injury report for Hu-B'S Offshore Marine Sales AND Service is published. One employer, no account, unsubscribe in one click.
Site address
1200 PORT AUTHORITY RD
City
EDDYVILLE
State
KY
ZIP
42038
Mailing
59 FUNWAY DR, EDDYVILLE, KY 42038
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811490
Employees
12
Ownership type
A

5 citations on file for this inspection.

1910.106 E02 IV A

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $3084.00 · Current $1573.00 Reduced
29 CFR 1910.106(e)(2)(iv)(a): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), was not kept in covered containers when not actually in use.    a)  Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, a can of Dura Technologies Inc.  Clear High Gloss Additive was sitting open without the lid in the shop area at the work bench exposing workers to a hazard of fire and/or flash fire.    b)  Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, a can of Auto Body Master  Wax and Grease Remover was sitting in the open without the cap in the shop area at the work bench exposing workers to a hazard of fire and/or flash fire.
Recent events (2)
  • — I (S) $1573
  • — Z (S) $3084

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $3084.00 · Current $1573.00 Reduced
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    a) Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, a handmade "box" fan was not guarded to protected workers from contacting the fan blades or point of operation on the motor driving fan blades.
Recent events (2)
  • — I (S) $1573
  • — Z (S) $3084

1910.303 B01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $3084.00 · Current $1573.00 Reduced
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:    a) Maintenance/Repair shop, on exterior SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, employer exposing employees to electrical hazards to from plate cover missing from air compressor.
Recent events (2)
  • — I (S) $1573
  • — Z (S) $3084

1910.305 G02 II

Serious Gravity 5 2 instances 2 exposed
Issued
Penalty
Initial $3084.00 · Current $1573.00 Reduced
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap. Hard-service cord and junior hard-service cord No. 14 and larger may be repaired if spliced so that the splice retains the insulation, outer sheath properties, and usage characteristics of the cord being spliced.    a) Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, a yellow flexible extension cord hanging from a rack in the Southeast Corner of the shop area was improperly spliced exposing workers to a hazard of electric shock.       b) Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, a orange flexible extension cord hanging from a rack in the Southeast Corner of the shop area was improperly spliced exposing workers to a hazard of electric shock.
Recent events (2)
  • — I (S) $1573
  • — Z (S) $3084

1910.305 G02 III

Other-than-serious 2 instances 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws.  a)  Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, the outer insulation of the cord was pulled free from the plug of an extension cord used to power an air compressor exposing workers to electrical shock hazards.      b) Maintenance/Repair shop, SW Wall, 1200 Port Authority Rd, Eddyville, KY.  On or about 15 January 2020, the outer insulation of the cord was pulled free from the plug of an extension cord used to power a floor fan exposing workers to electrical shock hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344566989.