OSHA Inspection: DELTA GALIL USA INC.

Issued

2020-05-28 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $4337.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    a) Receiving, Order Processing and Value Added Service Departments: Electrical handy boxes (metal with knockouts) were attached to flexible cords and used while suspended as pendant drops and as extension cord assemblies, as observed on or about March 9, 2020.    b) Value Added Service and Order Processing Departments: Relocatable power taps (RPT) were daisy chained with electrical handy boxes being used as extension cord assemblies, as observed on or about March 9, 2020.    Abatement Certification Required.

Issued

2020-05-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) Maintenance: Procedures were not developed and documented for the control of potentially hazardous energy for equipment including, but not limited to, balers, conveyors and air compressor, on or about March 17, 2020.  Abatement Observed During Inspection.

Issued

2020-05-28 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date:  a) Maintenance and Production: The employer did not certify that authorized and affected level training had been accomplished and kept up to date, on or about March 17, 2020.  Abatement Certification Required.

Issued

2020-05-28 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:  a) Maintenance: The Clark Powerworker powered industrial truck (order picker forklift) was equipped with a front end attachment (work platform) but was not marked on the forklift capacity plate, as observed on or about March 9, 2020.  Abatement Certification Required.

Issued

2020-05-28 00:00:00

Abate by

2020-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Maintenance and production: The employer did not develop or maintain at the workplace a written hazard communication program which describes how the criteria specified for labeling, safety data sheets and training will be met, on or about March 17, 2020.  Abatement Certification Required.