OSHA Inspection: MASCHMEYER HOLDINGS, INC. AND ITS SUCCESSORS

Issued

2020-04-27 00:00:00

Abate by

2020-05-21 00:00:00

Penalty

Initial $9639.00 · Current $5783.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s):  a) On or about 03/16/2020, at the block manufacturing plant, lockout and tagout devices were not identified to depict the name of the authorized person who was applying the device for equipment with potential to release hazardous energy such as, but not limited to, the Besser cuber, Besser Loader and Unloader Spade MS13, and Besser Cuber Plate, among others.

Issued

2020-04-27 00:00:00

Abate by

2020-05-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) On or about 03/16/2020, at the block manufacturing plant, a periodic, annual inspection of the energy control procedures had not been conducted for equipment with potential to release hazardous energy such as, but not limited to, the Besser cuber, Besser Loader and Unloader Spade MS13, and Besser Cuber Plate, among others.

Issued

2020-04-27 00:00:00

Abate by

2020-05-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about 03/16/2020, inside the block plant building at the west end of the building, 110VAC electrical wiring was not protected from strain relief, in that, its conduit was missing resulting in strain being placed on the wiring entering an electrical box for a motor.

Issued

2020-04-27 00:00:00

Abate by

2020-05-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion, and openings through which conductors enter were not effectively closed.   a) On or about 03/16/2020, at the west end of the block plant building, a junction box containing wiring was not effectively closed and the wiring entering the box was not protected from abrasion.