Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: NEW EXPERT FOUNDRY SERVICES, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of NEW EXPERT FOUNDRY SERVICES, INC. in 1444 N 5TH STREET, MILWAUKEE, WI 53212 (NAICS 333511). OSHA activity number 344825542.

Watch NEW Expert Foundry Services, INC. — free Get an email when a new federal OSHA severe-injury report for NEW Expert Foundry Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1444 N 5TH STREET
City
MILWAUKEE
State
WI
ZIP
53212
Mailing
1444 N 5TH STREET, MILWAUKEE, WI 53212
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333511
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4588.00 · Current $2700.00 Reduced

Hazardous substances 10739010

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  (a)  On or about July 9, 2020,  and thereafter, the employer did not provide a medical evaluation to determine each employee's ability to use a respirator before requiring the use. The employer required employees to wear  a 3M half elastomeric respirator while painting sand cores.
Recent events (2)
  • — I (S) $2700
  • — Z (S) $4588

1910.134 F02

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 10739010

29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:   (a) On or about July, 9, 2020, the employer did not provide a fit test to all employees required to wear respirators.  The employer required employees to wear 3M half face elastomeric respirator while painting sand cores.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1053 D01

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $6882.00 · Current $4100.00 Reduced

Hazardous substances S103

29 CFR  1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section:  (a) On or about July 9, 2020, the employer did not assess the core making employees' exposure to respirable crystalline silica dust during  core mold casting and cleaning operations.
Recent events (2)
  • — I (S) $4100
  • — Z (S) $6882

1910.1200 H01

Other-than-serious 1 instance 33 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 10739010

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   (a) On or about July 9, 2020,  employees were not effectively trained on the chemical hazards present while performing job tasks:  1) The hazard(s) of respirable crystalline silica dust  found in silica sand,  2)  The hazard(s) of sensitization to  isocyanate chemicals found in PEP SET II 2000, a binding agent.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01 I

Other-than-serious 1 instance 33 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9010

29 CFR  1910.1200(e)(1)(i):The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet.  (a) On or about July 9, 2020, the employer did not compile a complete list of the hazardous chemicals known to be present.  The list did not include the four types of sand used to make foundry cores and chemical products used for machinery care and maintenance, such as lubricants, grease and cleaning chemicals.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344825542.