OSHA Inspection: KANZLER CONSTRUCTION, LLC

Issued

2021-02-01 00:00:00

Abate by

2021-02-05 00:00:00

Penalty

Initial $4096.00 · Current $4096.00

General-duty citation text

29 CFR  1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  a)  On or about August 7, 2020, the employer did not ensure that the engine of the EXTEC Screen Machine was equipped with permanent guards during operation to protect employees from rotating pulleys and in-going nip points.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2021-02-01 00:00:00

Abate by

2021-02-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  a)  a)  On or about August 7, 2020, the employer did not ensure that the engine of the EXTEC Screen Machine was equipped with permanent guards during operation to protect employees from rotating belts and in-going nip points.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2021-02-01 00:00:00

Abate by

2021-02-05 00:00:00

Penalty

Initial $4096.00 · Current $4096.00

General-duty citation text

29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a)  On or about August 7, 2020, the employer failed to utilize a procedure to control the potentially hazardous energy for machines, such as EXTEC Screen Machine  when performing unjamming of the equipment.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2021-02-01 00:00:00

Abate by

2021-02-05 00:00:00

Penalty

Initial $4096.00 · Current $4096.00

General-duty citation text

29 CFR  1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:  a)  On or about August 7, 2020, the employer did not ensure that all employees that were unjamming EXTEC Screen Machine had the knowledge and skills needed to control the potentially hazardous energy.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.