OSHA Inspection: FRAME PROSLLC.

Issued

2020-12-23 00:00:00

Penalty

Initial $13494.00 · Current $13494.00

General-duty citation text

29 CFR  OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that, employees were exposed to a struck-by hazard:  a. At a new residential structure in construction: On or about September 2, 2020, employees were exposed to a struck-by hazard, in that; incorrectly set trusses that were in the process of being lifted and rotated with the use of a crane, were not uniformly braced over their entire length and were set with 25.5 blocks or braces, instead of 30 blocks or braces.

Issued

2020-12-23 00:00:00

Penalty

Initial $4048.00 · Current $4048.00

General-duty citation text

29 CFR  1926.753(c)(2): A qualified rigger (a rigger who is also a qualified person) shall inspect the rigging prior to each shift in accordance with �� 1926.251.  a. At a new residential structure in construction: On or about September 2, 2020, employees conducting rigging operations for the lift of roof trusses with the use of a crane, were not trained nor qualified to inspect or conduct truss rigging procedures, exposing employees to a collapse hazard.

Issued

2020-12-23 00:00:00

Abate by

2021-01-21 00:00:00

Penalty

Initial $325.00 · Current $325.00

General-duty citation text

29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part:  a. On or about September 2, 2020, the employer did not initiate and maintain a safety and health program which addressed the following basic elements:  1. Management Commitment and Leadership 2. Assignment of Responsibility 3. Identification and Control of Hazards 4. Training and Education 5. Recordkeeping and Hazard Analysis