Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DIEGO SANTIAGO RAYMUNDO

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DIEGO SANTIAGO RAYMUNDO in 1800 LOCKHART DRIVE, FORNEY, TX 75126 (NAICS 238130). OSHA activity number 345010995.

Watch Diego Santiago Raymundo — free Get an email when a new federal OSHA severe-injury report for Diego Santiago Raymundo is published. One employer, no account, unsubscribe in one click.
Site address
1800 LOCKHART DRIVE
City
FORNEY
State
TX
ZIP
75126
Mailing
5801 RIDGECOVE DRIVE, GARLAND, TX 75043
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3470.00 · Current $3470.00
29 CFR  1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  (a)   This violation occurred on or about November 2, 2020, at the job-site located at 1800 Lockhart Drive, Forney, TX; where employees were decking a new residential single family house and were exposed to head injuries where overhead hazard exists by not wearing hard hats.
Recent events (1)
  • — Z (S) $3470

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3470.00 · Current $3470.00
29 CFR  1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:  (a)   This violation occurred on or about November 2, 2020, at the job-site located at 1800 Lockhart Drive, Forney, TX; where employees were doing decking work while using a Makita circular saw, model number 5007F, serial number 2196456 to cut plywood. Employees were not wearing safety glasses and were exposed to eye injuries.
Recent events (1)
  • — Z (S) $3470

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $4048.00
29 CFR  1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m)  or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502:   (a)   This violation occurred on or about November 2, 2020, at the job-site located at 1800 Lockhart Drive, Forney, TX; where employees doing decking work were exposed to fall hazards.
Recent events (1)
  • — Z (S) $4048

1926.1051 A

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $4048.00
29 CFR  1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist was provided:  (a)  This violation occurred on or about November 2, 2020, at the job-site located at 1800 Lockhart Drive, Forney, TX; where employees were not provided with a ladder for access and/or egress to and from the upper working levels.
Recent events (1)
  • — Z (S) $4048

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345010995.