Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JORGE GONZALEZ SANCHEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JORGE GONZALEZ SANCHEZ in 450 N. ADDISON AVE, ELMHURST, IL 60126 (NAICS 238160). OSHA activity number 345067714.

Watch Jorge Gonzalez Sanchez — free Get an email when a new federal OSHA severe-injury report for Jorge Gonzalez Sanchez is published. One employer, no account, unsubscribe in one click.
Site address
450 N. ADDISON AVE
City
ELMHURST
State
IL
ZIP
60126
Mailing
600 2ND AVE, AURORA, IL 60505
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
10
Ownership type
A

5 citations on file for this inspection.

1903.19 D01

Other-than-serious 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $329.00 · Current $329.00
29 CFR  1903.19(d)(1):The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  Jorge Gonzalez Sanchez failed to submit documents to OSHA within 10 calendar days after the abatement date verifying  that each of the following cited violations had been corrected:  Citation Number                      Item  Number                 Abatement Date 01                                                    02a                                      02/05/2021 01                                                    03                                         02/05/2021  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (O) $329

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2341.00 · Current $2341.00
29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:     On or about December 16, 2020, an employee was not wearing a protective helmet where there was a possible danger of head injury from falling objects. Employees were throwing roofing materials off a residential roof onto the ground level, exposing the employee to struck-by hazards from falling objects.    No abatement certification or documentation is required for this item.
Recent events (1)
  • — Z (S) $2341

1926.501 B13

Serious Gravity 10 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $4096.00 · Current $4096.00
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure.    On or about December 16, 2020, employees were exposed to fall hazards between 13 feet and 25 feet high while engaged in residential roofing activities.  Fall protection was not being utilized while performing roofing operations.      Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $4096

1926.502 D17

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(d)(17): The attachment point of the body harness was not located in the center of the wearer's back near shoulder level, or above the wearer's head.  On or about December 16, 2020, an employee was exposed to fall hazards between 20 feet and 25 feet high while performing roofing operations on a residential property.  An employee was observed not using fall protection correctly when his lifeline lanyard was connected to the front of his harness while performing roofing operations.    No abatement certification or documentation is required for this item.
Recent events (1)
  • — Z (S) $0

1926.503 A01

Serious Gravity 10 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $4096.00 · Current $4096.00
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards:   On or about December 16, 2020, employees performing roofing work at a residential property were exposed to fall hazards between 13 feet and 25 feet with no fall protection when the employer failed to ensure they were adequately trained to recognize and minimize the hazards associated with fall.   Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $4096

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345067714.