WASHINGTON, KS —
OSHA Inspection: KEESECKER AGRI BUSINESS INC. (MAIN)
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KEESECKER AGRI BUSINESS INC. (MAIN) in 2069 PRAIRIE ROAD, WASHINGTON, KS 66968 (NAICS 112210). OSHA activity number 345103790.
Watch Keesecker Agri Business INC. (Main) — free
Get an email when a new federal OSHA severe-injury report for Keesecker Agri Business INC. (Main) is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- KEESECKER AGRI BUSINESS INC. (MAIN)
- Site address
- 2069 PRAIRIE ROAD
- City
- WASHINGTON
- State
- KS
- ZIP
- 66968
- Mailing
- 2069 PRAIRIE ROAD, WASHINGTON, KS 66968
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112210
- Employees
- 35
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.28 B11 I
- Issued
- Abate by
- Penalty
- Initial $9557.00 · Current $6212.00 Reduced
General-duty citation text
29 CFR 1910.28(b)(11)(i): The employer did not ensure that each employee exposed to an unprotected side or edge of a stairway landing that is 4 feet (1.2 m) or more above a lower level is protected by a guardrail or stair rail system: Employee was exposed to fall hazards. Employee engaged in milling activities in the feed mill area was exposed to fall hazards of 56 inches from the Micro Bin platform to the cement ground below in that the stairway was not equipped with a guardrail or stair rail system with handrail on open side. 29 CFR 1903.19(d)(1) requires certification and documentation that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $6212.05
- — Z (S) $9557
1910.134 C01
- Issued
- Abate by
- Penalty
- Initial $6827.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: Employee was exposed to health hazards. Employee engaged in milling activities in the feed mill area was exposed to health hazards in that the employer did not develop and implement a written respiratory protection program with worksite-specific procedures for respirator use that included all provisions in 29 CFR 1910.134(c)(1)(i) - (ix). Employees are required to wear 3M Half Face-Piece 6300/07026 respirators when cleaning the feed mill area. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $0
- — Z (S) $6827
1910.134 E01
- Issued
- Abate by
- Penalty
- Initial $6827.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: Employee was exposed to health hazards. Employee engaged in milling activities in the feed mill area was exposed to health hazards in that the employer had not determined, through a medical evaluation, the employee's ability to use a respirator before the employee is fit tested or required to use a respirator. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $0
- — Z (S) $6827
1910.134 F02
- Issued
- Abate by
- Penalty
- Initial $6827.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: Employee was exposed to health hazards. Employee engaged in milling activities in the feed mill area was exposed to health hazards in that the employer did not provide a fit test to all employees required to wear respirators. Employees are required to wear 3M Half Face-Piece 6300/07026 respirators when cleaning the feed mill area. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $0
- — Z (S) $6827
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $4096.00 · Current $2662.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees were exposed to amputation and struck-by hazards. Employees engaged in maintenance and repair activities in the maintenance shop at the Delta 20" Drill Press 508mm serial #R9719, model #70-200, were exposed to amputation hazards in that machine guarding was not provided. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $2662.4
- — Z (S) $4096
1910.215 A02
- Issued
- Abate by
- Penalty
- Initial $4096.00 · Current $2662.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: Employees engaged in maintenance and repair activities including grinding at the Baldor Buffer/Grinder Cat #1251, Spec #G12-91-1 P2-94, HP 2, Phase 1, 60 Hz, 115/230V, 19/9.5A, 3600 RPM located in the maintenance shop area were exposed to struck-by hazards in that the side guards installed over the side flanges and wheels to prevent contact was not provided. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $2662.4
- — Z (S) $4096
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $4096.00 · Current $2662.00 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Employees engaged in maintenance and repair activities including grinding at the Baldor Buffer/Grinder Cat #1251, Spec #G12-91-1 P2-94, HP 2, Phase 1, 60 Hz, 115/230V, 19/9.5A, 3600 RPM located in the maintenance shop area were exposed to struck-by hazards in that the distance from the abrasive wheel to the adjustable tongue guard was found to be approximately 2 inches. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $2662.4
- — Z (S) $4096
More inspections in this industry (NAICS 112210)
AUSTIN, MN—2026-02-10
110708 - MHF OF FREEBORN COUNTY INC
AUSTIN, MN—2026-02-10
110703 - MHF OF FREEBORN COUNTY INC
HANCOCK, MN—2026-02-03
110661 - MOORE LEAN LLP
HANCOCK, MN—2026-02-03
110660 - MOORE LEAN LLP
CASSATT, SC—2026-01-22
77312 - PRESTAGE FARMS
More inspections in KS
SHAWNEE, KS—2026-07-15
BECKER EXTERIORS
SHAWNEE, KS—2026-07-15
DLR RENOVATION
SHAWNEE, KS—2026-07-15
LUIS ARIAS
OLATHE, KS—2026-07-15
U.S. POSTAL SERVICE
ARKANSAS CITY, KS—2026-07-15
SKYLINE HOMES
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345103790.