OSHA Inspection: P&M/MERCURY MECHANICAL CORP.

Issued

2021-03-11 00:00:00

Penalty

Initial $5461.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    a) On or about March 9, 2021, employees were exposed to head injury while working without protective helmets in areas adjacent to and below hoisting work activities.    No abatement certification or documentation required for this violation.

Issued

2021-03-11 00:00:00

Abate by

2021-03-17 00:00:00

Penalty

Initial $9557.00 · Current $6500.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems or personal fall arrest systems:    a) On or about March 9, 2021, employees were exposed to the hazard of falling three stories (approximately 30 feet) from the roof of a commercial building to the ground while working in a hoist area at the edge of the roof deck.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2021-03-11 00:00:00

Abate by

2021-03-17 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    a) On or about March 9, 2021, employees were exposed to the hazard of falling three stories (approximately 30 feet) from the roof of a commercial building to the ground during the performance of mechanical and related work activities.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.