OSHA Inspection: JUAN BARBOSA

Issued

2021-04-16 00:00:00

Abate by

2021-04-26 00:00:00

Penalty

Initial $2341.00 · Current $2341.00

General-duty citation text

29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.   At the jobsite, employees were not wearing hardhats while working below other employees that were installing framing material to a residential house, exposing employees to struck-by hazards from falling objects.

Issued

2021-04-16 00:00:00

Abate by

2021-04-26 00:00:00

Penalty

Initial $2341.00 · Current $2341.00

General-duty citation text

29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   At the jobsite, employees operating Paslode nail guns while performing framing activities were not wearing eye protection, exposing employees to the hazard of being struck by flying objects.

Issued

2021-04-16 00:00:00

Abate by

2021-04-26 00:00:00

Penalty

Initial $4096.00 · Current $4096.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system.    At the jobsite, employees engaged in framing activities at a height of over 6 feet were not protected by a fall arrest system. Employees were exposed to an unprotected fall of over 14 feet to the ground below.

Issued

2021-04-16 00:00:00

Abate by

2021-04-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  At the jobsite, employees performing framing activities were not provided fall protection.  The employer did not provide a training program with hazard recognition and avoidance training where part of the job is to be exposed to fall hazards at a heights over 6 feet to the ground below.