OSHA Inspection: JOHNNY'S CUSTOM CABINET, INCORPORATED

Issued

2021-05-28 00:00:00

Abate by

2021-06-10 00:00:00

Penalty

Initial $2341.00 · Current $1404.00 Reduced

General-duty citation text

29 CFR 1910.29(b)(2): Midrails, screens, mesh, intermediate vertical members, solid panels, or equivalent intermediate members were not installed between the walking-working surface and the top edge of the guardrail system:   a) On the east side of the woodworking shop, where the guardrail system on the mezzanine above the office and the break room did not have a midrail installed, exposing employees to fall hazards.

Issued

2021-05-28 00:00:00

Abate by

2021-06-10 00:00:00

Penalty

Initial $2341.00 · Current $1405.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by rotating parts:  a) In the woodworking shop, where the rotating parts of a Grizzly Vertical Drill Press G7948 were not guarded, exposing  employees to caught-in hazards.

Issued

2021-05-28 00:00:00

Abate by

2021-07-26 00:00:00

Penalty

Initial $3511.00 · Current $2106.00 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut:  a) In the woodworking shop, two Powermatic table saws were not equipped with an automatically adjusting hood completely enclosing the portion of the saw above the table and above the material being cut.  b) In the woodworking shop, a SCM Nova Si 300 sliding table saw was not equipped with an automatically adjusting hood completely enclosing the portion of the saw above the table and above the material being cut.  c) In the woodworking shop, a Holz-her Super Slide 1245 panel saw was not equipped with an automatically adjusting hood completely enclosing the portion of the saw above the table and above the material being cut.  d) In the woodworking shop, a Delta Rockwell Mode 10 Contractor saw was not equipped with an automatically adjusting hood completely enclosing the portion of the saw above the table and above the material being cut.  e) In the woodworking shop, two Delta Rockwell Unisaw table saws were not equipped with an automatically adjusting hood completely enclosing the portion of the saw above the table and above the material being cut.

Issued

2021-05-28 00:00:00

Abate by

2021-07-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  a) In the woodworking shop, two Powermatic table saws were not equipped with a spreader, exposing employees to struck-by hazards.  b) In the woodworking shop, a Delta Rockwell Mode 10 Contractor saw was not equipped with a spreader, exposing employees to struck-by hazards.  c) In the woodworking shop, two Delta Rockwell Unisaw table saws were not equipped with a spreader, exposing employees to struck-by hazards.

Issued

2021-05-28 00:00:00

Abate by

2021-07-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  a)  In the woodworking shop, two Powermatic table saws were not equipped with nonkickback finger, exposing employees to struck-by hazards.  b) In the woodworking shop, a Delta Rockwell Mode 10 Contractor saw was not equipped with nonkickback finger, exposing employees to struck-by hazards.  c) In the woodworking shop, two Delta Rockwell Unisaw table saws were not equipped with nonkickback finger, exposing employees to struck-by hazards.

Issued

2021-05-28 00:00:00

Abate by

2021-06-24 00:00:00

Penalty

Initial $1755.00 · Current $1053.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) In the woodworking shop, the employer did not develop, implement, and maintain a written hazard communication program. Employees use hazardous substances such as, but not limited to: Sunnyside Specs Paint Thinner, a flammable; and Crown Lacquer Thinner, an eye and skin irritant.

Issued

2021-05-28 00:00:00

Abate by

2021-06-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(1): The employer did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a) In the woodworking shop, a safety data sheet for Sunnyside Specs Paint Thinner, a flammable, was not maintained.  b) In the woodworking shop, a safety data sheet for Crown Lacquer Thinner, an eye and skin irritant, was not maintained.

Issued

2021-05-28 00:00:00

Abate by

2021-07-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment:  a) In the woodworking shop, where employees had not received effective hazard communication information and training. Employees use hazardous substances such as, but not limited to: Sunnyside Specs Paint Thinner, a flammable; and Crown Lacquer Thinner, an eye and skin irritant.