Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: THE GREEN SOURCE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of THE GREEN SOURCE in 6345 E PLATTE AVE, COLORADO SPRINGS, CO 80915 (NAICS 111998). OSHA activity number 345386635.

Watch THE Green Source — free Get an email when a new federal OSHA severe-injury report for THE Green Source is published. One employer, no account, unsubscribe in one click.
Establishment
THE GREEN SOURCE
Site address
6345 E PLATTE AVE
City
COLORADO SPRINGS
State
CO
ZIP
80915
Mailing
2103 EAST PLATTE AVENUE, COLORADO SPRINGS, CO 80909
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
111998
Employees
12
Ownership type
A

4 citations on file for this inspection.

1910.212 A01

Serious Gravity 10 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $5461.00 · Current $3000.00 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about June 28, 2021, and at times prior, employees operating the Twister T2 trimming machines were not protected from amputation hazards where guarding was inadequate to prevent contact with the moving blades.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5461

1910.219 D01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2340.00 · Current $1000.00 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about June 28, 2021, and at times prior, employees operating the Twister T2 trimming machines were not protected from amputation hazards where guarding was inadequate to prevent contact with the moving blades.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2340

1910.219 E03 I

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  a) On or about June 28, 2021, and at times prior, employees operating the Twister T2 trimming machines were exposed to pinch point and rotating parts hazards where the belts for the tumblers and motor assemblies were not guarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3901.00 · Current $1850.00 Reduced
29 CFR  1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye:   (a) A work-related amputation which occurred on April 1, 2021, was not reported to OSHA.
Recent events (2)
  • — I (O) $1850
  • — Z (O) $3901

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345386635.