Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MAST SAWING LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of MAST SAWING LLC in 6967 SALT CREEK ROAD, FREDERICKSBURG, OH 44627 (NAICS 321920). OSHA activity number 345560270.

Watch Mast Sawing LLC — free Get an email when a new federal OSHA severe-injury report for Mast Sawing LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MAST SAWING LLC
Site address
6967 SALT CREEK ROAD
City
FREDERICKSBURG
State
OH
ZIP
44627
Mailing
6967 SALT CREEK ROAD, FREDERICKSBURG, OH 44627
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
Employees
6
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4096.00 · Current $4096.00
29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  On or about September 24, 2021, employees were exposed to a struck by hazard while performing  sawmill operations at Mast Sawing LLC.  Employees were operating a CAT Model 924K Fork Truck to move and stack lumber in the storage areas of the main yard and the employer did not ensure that the operators were trained to operate the fork lift safely.
Recent events (2)
  • — I (S) $4096
  • — Z (S) $4096

1910.178 N06

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4096.00 · Current $4096.00
29 CFR  1910.178(n)(6): Industrial truck drivers were not required to look in the direction of, and keep a clear view of the path of travel:   On or about September 24, 2021, employees were exposed to a struck by hazard while performing sawmill operations at Mast Sawing LLC.  Employees were operating a CST Model 924K Fork Truck to move and stack lumber to the storage areas in the main yard and the employer did not ensure that the operators were trained to operate the fork lift safely and look in the direction of travel.
Recent events (2)
  • — I (S) $4096
  • — Z (S) $4096

1910.178 P01

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $4096.00 · Current $4096.00
29 CFR  1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):   On or about September 24, 2021, employees were exposed to a struck by hazard while performing sawmill operations at Mast Sawing LLC.  Employees were operating a CAT Model 924K Fork Truck to move and stack lumber to the storage areas in the main yard and the employer did not ensure that the machine was taken out of service when the backup warning alarm was found to not operational.
Recent events (2)
  • — I (S) $4096
  • — Z (S) $4096

1904.39 A01

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $2926.00 · Current $2926.00
29 CFR  1904.39(a)(1): The employer did not report within 8-hours the death of an employee resulting from a work-related incident    On or about September 24, 2021, the employer did not report within 8 hours the fatal accident of an employee  while performing saw mill activities at his workplace.  OSHA was not notified of the fatality until on or about September 27, 2021. The accident was not reported by the employer,  OSHA was notified of the accident by the local police department.
Recent events (2)
  • — I (O) $2926
  • — Z (O) $2926

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345560270.