OSHA Inspection: SENTRILOCK LLC

Issued

2022-02-07 00:00:00

Abate by

2022-03-25 00:00:00

Penalty

Initial $13052.00 · Current $4000.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii):  The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.  (a)  On or about October 20, 2021, the point of operation of the Sonitek Spectrum S5 Basic Thermal Press (station 2 on line 1) was not adequately guarded to protect the operator's hands while holding onto the part at the point of operation creating a pinch point hazard from the four 375 degree F heated tips.

Issued

2022-02-07 00:00:00

Abate by

2022-03-04 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(d)(2):The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  (a)  On or about November 10, 2021, the employer did not provide a written certification of hazard assessment for the assembly process, which started production February 12, 2021.