OSHA Inspection: SGG CUSTOM BUILDERS INC.

Issued

2022-04-26 00:00:00

Abate by

2022-06-13 00:00:00

Penalty

Initial $349.00 · Current $349.00

General-duty citation text

29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section:  The employer did not furnish the abatement required for citations issued within 10 calendar days for Citation No. 1 Item No(s). 1, 5, and 7 nor did they respond to the progress report letter sent April 6, 2022.

Issued

2022-02-23 00:00:00

Abate by

2022-03-14 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.20(b)(2):The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  Site- Employees were not protected from fall and struck by hazards where the employer did not have a competent person conduct inspections of the jobsite on a frequent and regular basis.

Issued

2022-02-23 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.251(a)(2)(i): The employer did not ensure that rigging equipment had permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load:   Site- Employees were not protected from a struck by hazard where a damaged synthetic web sling, without a capacity rating, was placed into service.

Issued

2022-02-23 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.251(a)(6): Each day before being used, and during use, where service conditions warrant, the sling and all fastenings and attachments were not inspected for damage or defects by a competent person, and damaged or defective slings were not immediately removed from service:   Site- Employees were not protected from a struck by hazard where a damaged synthetic web sling, without a capacity rating, was placed into service without being inspected prior to use.

Issued

2022-02-23 00:00:00

Penalty

Initial $4351.00 · Current $4351.00

General-duty citation text

29 CFR  1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.   Site- An employee working from the top plate of the first floor wall framing was not protected from a fall of 12 feet where fall protection was not utilized.

Issued

2022-02-23 00:00:00

Abate by

2022-03-14 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   Site- An employee exposed to a fall hazard while working from the top plate of the first floor wall framing without fall protection was not provided with fall protection training.

Issued

2022-02-23 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were  made without the manufacturer's written approval: Note:  If such modifications or changes were made, the capacity, operation, and maintenance instruction plates, tags, or decals should have been changed accordingly.   Site- Employees were not protected from a struck by hazard where a Lull JLG 644E-42 all terrain forklift was operated with 10 foot 6 inch fork extensions and did not have manufacturer's written approval.

Issued

2022-02-23 00:00:00

Abate by

2022-03-14 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):  Site- An employee operating a Lull JLG 644E-42 all terrain forklift was not provided with operator training.

Issued

2022-02-23 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided:   Site- An employee was not protected from a fall hazard where a ladder long enough to reach the top plate of the first floor wall framing was not provided for access.

Issued

2022-02-23 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR  1926.1053(b)(13): The top or top step of a stepladder was used as a step:  Site- An employee was exposed to a fall hazard while standing on top of a Werner 6 foot fiberglass step ladder.