Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MASTERCRAFT REMODELING, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MASTERCRAFT REMODELING, LLC. in 817 18TH STREET, NE, WASHINGTON, DC 20002 (NAICS 236118). OSHA activity number 345670855.

Watch Mastercraft Remodeling, LLC. — free Get an email when a new federal OSHA severe-injury report for Mastercraft Remodeling, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
817 18TH STREET, NE
City
WASHINGTON
State
DC
ZIP
20002
Mailing
9421 FRANKLIN AVENUE, LANHAM, MD 20706
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236118
Employees
2
Ownership type
A

5 citations on file for this inspection.

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3108.00 · Current $3108.00
29 CFR  1926.451(g)(1):Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  a) Rear of Building - Employee was on a pumpjack scaffold work platform while installing siding and exposed to a 20 foot fall hazard, on or about 12/06/2021.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (1)
  • — Z (S) $3108

1926.454 A

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:  a) Rear of Building - An employee was not provided training on how to work safely while on a pumpjack scaffold work platform as evidenced by noted hazards such as but not limited to; not using fall protection when exposed to an 18 foot fall, on or about 12/06/2021.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (1)
  • — Z (S) $0

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $4351.00
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) North Side of Building -  Employees were observed walking near an open lower level patio/window well and exposed to a 9 foot fall hazard, on or about 12/06/2021.  b) Rear Balcony - An employee was standing on an exterior balcony while handing siding to a co-worker on a pumpjack scaffold and exposed to a 20 foot fall hazard, on or about 12/06/2021.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4351

1926.1053 B01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1865.00 · Current $1865.00
29 CFR  1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) Northeast Corner Patio/Window Well - Employees were using a portable aluminum ladder to gain access to the lower level units and the ladder only extended one foot above the patio/window well retaining wall, on or about 12/06/2021.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (1)
  • — Z (S) $1865

1926.1060 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.1060(a)(1): The employer did not provide a training program for each employee using ladders as necessary, enabling each employee to recognize hazards related to ladders and the procedures to be followed to minimize these hazards:  a) Job Site - Employees were not provided with a ladder training program, where employees were using a ladder to gain access to an upper level and the ladder was not properly extended, on or about, 12/06/2021.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (1)
  • — Z (S) $0

MACY'S

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345670855.