Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WESTERN SKYWAYS, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of WESTERN SKYWAYS, INC. in 21 CREATIVE PLACE, MONTROSE, CO 81401 (NAICS 488190). OSHA activity number 345687792.

Watch Western Skyways, INC. — free Get an email when a new federal OSHA severe-injury report for Western Skyways, INC. is published. One employer, no account, unsubscribe in one click.
Site address
21 CREATIVE PLACE
City
MONTROSE
State
CO
ZIP
81401
Mailing
21 CREATIVE PLACE, MONTROSE, CO 81401
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
488190
Employees
26
Ownership type
A

5 citations on file for this inspection.

1910.215 A02

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3698.00 · Current $0.00 Reduced
29 CFR  1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:  a) Western Skyways, Inc.: On or before December 14, 2021 and at times prior, the employer did not ensure that the guard was adjusted to the wheel as it eroded due to use. The distance between the grinding wheel and the guard was in excess of one quarter of an inch.  Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $3698

1910.1025 H01

Other-than-serious Gravity 1 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $3698.00 · Current $3698.00
29 CFR  1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead:  a) Western Skyways, Inc.: On or about December 14, 2021 and at times prior the employer did not protect employees from injury in that lead accumulation on surfaces in the cleaning area exceeded reasonable levels. On the disassembly bench, a wipe sample found over 1mg of accumulated lead. On the handle of an engine parts cart, a wipe sample found over 4mg of accumulated lead. These conditions exposed employees to lead.   Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $3698
  • — Z (S) $3698

1910.1200 F06 II

Other-than-serious 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(f)(6)(ii):  Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  a) Western Skyways, Inc.: On or about December 14, 2021, and at times prior, the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked in accordance with this standard. This condition exposed employees to products that contain hazardous chemicals, including, but not limited to hazardous chemicals.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(g)(8):  The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  a) Western Skyways, Inc.: On or about December 14, 2021 the employer did not ensure that Safety Data Sheets were maintained for all chemicals used in the facility. The employer was using the outdated Material Safety Data Sheets.   Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Western Skyways, Inc.: On or about December 14, 2021 and at times prior, employees used hazardous chemicals in the shop and repair area. Employees were not provided with effective information and training on the use and handling of the hazardous chemicals in the workplace. This condition potentially exposed employees to serious hazards from hazardous chemicals, including, but not limited to, Auto Brite wheel cleaner, Kubota transmission fluid, Mag 1 brake cleaner, Valvoline starting fluid, Napa brake cleaner, NCP2 battery anti-corrosion, and Supra-X windshield treatment.  Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345687792.