ELMWOOD PARK, NJ —
OSHA Inspection: YG CONSTRUCTION INC
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of YG CONSTRUCTION INC in 300 RIVERFRONT BLVD, ELMWOOD PARK, NJ 07407 (NAICS 238140). OSHA activity number 345689400.
Where did this inspection happen?
- Establishment
- YG CONSTRUCTION INC
- Site address
- 300 RIVERFRONT BLVD
- City
- ELMWOOD PARK
- State
- NJ
- ZIP
- 07407
- Mailing
- 389 WALNUT STREET, NEWARK, NJ 07105
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- Abate by
- Penalty
- Initial $3729.00 · Current $3729.00
General-duty citation text
29 CFR 1910.134(c)(1):The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators were necessary to protect the health of the employee or whenever respirators were required by the employer: a) YG Construction Inc: A written respiratory protection program was not provided where respiratory protection was required to protect the health of an employee from silica dust while grinding concrete walls on the building stairs, on or about 12/14/21.
Recent events (1)
- — Z (S) $3729
1910.134 C01 II
- Issued
- Abate by
- Penalty
- Initial $4351.00 · Current $4351.00
General-duty citation text
29 CFR 1910.134(c)(1)(ii):29 CFR 1910.134(c)(1)(ii): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) YG Construction Inc did not provided a medical evaluation to determine the employee's ability to use a respirator while grinding a concrete wall creating silica dust, on or about 12/14/21.
Recent events (1)
- — Z (S) $4351
1910.134 C01 III
- Issued
- Abate by
- Penalty
- Initial $4351.00 · Current $4351.00
General-duty citation text
29 CFR 1910.134(c)(1)(iii):The written program did not contain fit test procedures for tight-fitting respirators. a) YG Construction Inc, Did not provided a fit test for employees using N95 respirators while girding a concrete wall, creating silica dust, on or about 12/14/21.
Recent events (1)
- — Z (S) $4351
1926.102 A01
- Issued
- Penalty
- Initial $3729.00 · Current $3729.00
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury: a) Building interior stairs: Employees were exposed to eye/face injuries while grinding a concrete wall on the stairs and were not protected with any type of eye/face protection, on or about 12/14/21.
Recent events (1)
- — Z (S) $3729
1926.150 A01
- Issued
- Penalty
- Initial $4351.00 · Current $4351.00
General-duty citation text
29 CFR 1926.150(a)(1): The employer did not develop and maintain a fire protection program to be followed throughout all phases of construction and demolition work, and/or did not provide for the firefighting equipment as specified in this subpart: a) YG Construction Inc, does not ensure that employees have available firefighting equipment at the jobsite. This violation was most recently observed at 300 Riverfront Blvd, Elmwood park NJ. The employer did not provide any firefighting equipment at the jobsite. Gasoline fueled generators was used in side the building to power electric equipment such as grinders, extension cords. Extra gasoline to fuel the generators was stored in gas cans on the site, on or about 12/14/21
Recent events (1)
- — Z (S) $4351
1926.1153 C02 II
- Issued
- Penalty
- Initial $4351.00 · Current $4351.00
General-duty citation text
29 CFR 1926.1153(c)(2)(ii): Water was not applied at flow rates sufficient to minimize release of visible dust for tasks performed using wet methods: a) Building Interior, Stairs A: The employer did not apply water to minimize the release of visible dust while dry cutting a concrete on the stairs. Employees were exposed to silica dust while dry cutting with hand held angle grinders, on or about 12/14/21. b) a) Building Interior, Stairs B: The employer did not apply water to minimize the release of visible dust while dry cutting a concrete on the stairs. Employees were exposed to silica dust while dry cutting with hand held angle grinders, on or about 12/14/21.
Recent events (1)
- — Z (S) $4351
More inspections in this industry (NAICS 238140)
RENO, NV—2026-07-16
DC MASONRY
WINNETKA, IL—2026-07-15
CHICAGO STUCCO CO.
LODI, NJ—2026-07-15
J & O MASONRY CONTRACTORS
DORAVILLE, GA—2026-07-14
SUDLOW CONCRETE, INC.
FLAGLER BEACH, FL—2026-07-14
PLANET DESIGN SERVICES, INC.
More inspections in NJ
PERTH AMBOY, NJ—2026-07-16
ENGLERT INC.
RIDGEFIELD, NJ—2026-07-16
COLORITE PLASTICS COMPANY
BERLIN, NJ—2026-07-16
URUS CONSTRUCTION CORPORATION
GLASSBORO, NJ—2026-07-15
GLASSBORO WATER & SEWER DEPARTMENT
FLANDERS, NJ—2026-07-15
TRI-STATE QUIKRETE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345689400.