OSHA Inspection: CCPJV, INC.

Issued

2022-03-03 00:00:00

Abate by

2022-03-09 00:00:00

Penalty

Initial $5801.00 · Current $3481.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  On or about January 26, 2022, and at times prior thereto, in the welding area where an employee was exposed to an amputation hazard while operating a DoAll band saw, Model DS-280M without a guard covering the unused section of the blade.

Issued

2022-03-03 00:00:00

Abate by

2022-03-22 00:00:00

Penalty

Initial $7252.00 · Current $4351.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii):Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:  On or about January 26, 2022, and at times prior thereto, in the front of the shop area where an employee was exposed to a crushed-by hazard while operating machinery without point of operation guarding. a. Masteel press brake b. Birmingham Shear

Issued

2022-03-03 00:00:00

Abate by

2022-04-29 00:00:00

Penalty

Initial $7252.00 · Current $4351.00 Reduced

General-duty citation text

29 CFR  1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:   On or about January 26, 2022, and at times prior thereto, in the pallet department where employees were exposed to an amputation hazard while operating a Ridgid table saw without the blade be fully enclosed with an automatically adjusting hood.

Issued

2022-03-03 00:00:00

Abate by

2022-03-09 00:00:00

Penalty

Initial $5801.00 · Current $3481.00 Reduced

General-duty citation text

29 CFR  1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  On or about January 26, 2022, and at times prior thereto, in the pallet department where employees were exposed to a caught-in hazard while operating a Ridgid table saw with an unguarded pulley.

Issued

2022-03-03 00:00:00

Abate by

2022-03-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  On or about January 26, 2022, and at times prior thereto, in the pallet department where employees were exposed to a caught-in hazard while operating a Ridgid table saw with an unguarded belt.

Issued

2022-03-03 00:00:00

Abate by

2022-03-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.134(c)(1):A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  On or about January 26, 2022, and at times prior thereto, employees in the insulation department were required to wear KN-95 particulate respirators while applying paints and cutting insulation without a written respiratory protection program with specific procedures being established and implemented.