Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: JORGE PALACIOS

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of JORGE PALACIOS in 9121 RED BRUSH TRAIL, BENBROOK, TX 76109 (NAICS 238140). OSHA activity number 345752612.

Watch Jorge Palacios — free Get an email when a new federal OSHA severe-injury report for Jorge Palacios is published. One employer, no account, unsubscribe in one click.
Establishment
JORGE PALACIOS
Site address
9121 RED BRUSH TRAIL
City
BENBROOK
State
TX
ZIP
76109
Mailing
3041 RONAY DRIVE, FORT WORTH, TX 76140
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $1492.00 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  At the job site, employees were not provided eye protection when operating a Milwaukee masonry saw cutting bricks and were exposed to eye injuries from flying objects.
Recent events (2)
  • — I (S) $1491.6
  • — Z (S) $2486

1910.134 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $1492.00 Reduced
29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103)  At the jobsite, employees who were cutting masonry brick with a Milwaukee 14" Masonry cutting saw were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.
Recent events (2)
  • — I (S) $1491.6
  • — Z (S) $2486

1926.304 D

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3729.00 · Current $2237.00 Reduced
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe.     At the jobsite, employees operating a Milwaukee masonry saw with the lower level guard wedged in the up position while cutting bricks, stones and other masonry material.  The employees were exposed to amputation hazards.
Recent events (2)
  • — I (S) $2237.4
  • — Z (S) $3729

1926.1153 C01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1865.00 · Current $1119.00 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.   At the construction site, the employer did not ensure that employees using a Milwaukee masonry saw to cut bricks and stones were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (2)
  • — I (S) $1119
  • — Z (S) $1865

1926.1153 D02 I

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:   At the residential construction site, the employer did not assess the exposure for employees using a Milwaukee masonry saw and a portable masonry saw to cut bricks. Employees were potentially exposed to silica.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345752612.