Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MAXX CONTRACTORS CORP

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MAXX CONTRACTORS CORP in 220 GRACELAND AVE, DES PLAINES, IL 60016 (NAICS 237110). OSHA activity number 345811756.

Watch Maxx Contractors Corp — free Get an email when a new federal OSHA severe-injury report for Maxx Contractors Corp is published. One employer, no account, unsubscribe in one click.
Site address
220 GRACELAND AVE
City
DES PLAINES
State
IL
ZIP
60016
Mailing
220 GRACELAND AVE, DES PLAINES, IL 60016
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
237110
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.21 B02

Serious Gravity 5 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $3729.00 · Current $3729.00
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:        a) On February 28, 2022, employees were not trained in the hazards associated with excavations. The employer did not provide/ensure training to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $3729

1926.651 K01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.651(k)(1): An inspection of the excavations, the adjacent areas, and protective systems was not conducted by the competent person prior to the start of work and as needed throughout the shift:        a) On or about February 28, 2022, the employer did not have a competent person conduct inspections prior to the start of work and as needed throughout the shift during trenching and excavation work.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2486.00 · Current $2486.00
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:   a) On or about February 28, 2022, employees were exposed to head injury while working in a trench and around excavating equipment without protective helmets.    No abatement certification or documentation required for this violation.
Recent events (1)
  • — Z (S) $2486

1926.652 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $4351.00
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c):        a) On or about February 28, 2022, employees were not protected from the hazard of cave-ins by shoring, sloping, or other protective means while working in a trench having a depth of approximately 6 feet.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4351

1926.1053 B04

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $1865.00 · Current $1865.00
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:        a) On or about February 28, 2022,  an 8-foot A-Frame style stepladder was used for climbing to and from a trench.  No abatement certification or documentation required for this violation.
Recent events (1)
  • — Z (S) $1865

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345811756.