Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: EARLYBIRD NUTRITION, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of EARLYBIRD NUTRITION, LLC in 300 EAST BROADWAY STREET, ROSEVILLE, IL 61473 (NAICS 311119). OSHA activity number 345840839.

Watch Earlybird Nutrition, LLC — free Get an email when a new federal OSHA severe-injury report for Earlybird Nutrition, LLC is published. One employer, no account, unsubscribe in one click.
Site address
300 EAST BROADWAY STREET
City
ROSEVILLE
State
IL
ZIP
61473
Mailing
300 EAST BROADWAY STREET, ROSEVILLE, IL 61473
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311119
Employees
8
Ownership type
A

8 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $3263.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees operating  a powered industrial truck while working from a platform were exposed to fall hazards:   On or about March 16, 2022, employees were exposed to fall hazards of 14 feet to a lower level when working from a platform which was raised by a forklift and the employer did not ensure employees were trained to recognize fall hazards and restraining means such as a guard rail or a means for securing personnel was not provided and used in accordance with ANSI B56.1-2012, American National Standard For Low Lift and  High Lift Trucks.
Recent events (2)
  • — I (S) $3263.25
  • — Z (S) $4351

1910.140 C13 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $0.00 Reduced
29 CFR  1910.140(c)(13)(i): Anchorages were not capable of supporting at least 5000 pounds (22.2 kN) for each employee attached:  On or about March 1, 2022, an employee was exposed to fall hazards approximately 30 feet to a lower level when attaching a fall protection lanyard to the guardrail system and the employer did not ensure the anchorage point would support at least 5000 pounds.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4351

1910.146 C04

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3108.00 · Current $2331.00 Reduced
29 CFR  1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146:   On or about February 16, 2022, employees were exposed to mechanical and entrapment hazards when performing maintenance activities inside the Doyle 5 Ton Direct Drive Rotary Blender Drum and the employer did not develop a written permit space entry program.
Recent events (2)
  • — I (S) $2331
  • — Z (S) $3108

1910.146 C01

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3108.00 · Current $2331.00 Reduced
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces:  On or about February 16, 2022, employees were exposed to mechanical hazards when performing maintenance activities inside the Doyle 5 Ton Direct Drive Rotary Blender Drum and the employer did not document procedures for the control of hazardous energy.
Recent events (2)
  • — I (S) $2331
  • — Z (S) $3108

1910.147 C04 II C

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3108.00 · Current $0.00 Reduced
29 CFR  1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them.   On or about February 16, 2022, employees were exposed to mechanical hazards when performing maintenance activities inside the Doyle 5 Ton Direct Drive Rotary Blender Drum and the employer did not have a procedure for the application of a lockout/tagout device.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3108

1910.147 D04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3108.00 · Current $2331.00 Reduced
29 CFR  1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:   On or about February 16, 2022, employees were exposed to mechanical hazards when performing maintenance activities inside the Doyle 5 Ton Direct Drive Rotary Blender Drum and the employer did not ensure lockout or tagout devices were applied to energy sources.
Recent events (2)
  • — I (S) $2331
  • — Z (S) $3108

1910.178 L01 I

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $3263.00 Reduced
29 CFR  1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):   On or about March 16, 2022, employees were exposed to fall hazards of 14 feet to a lower level when working from a platform which was raised by forklifts with holes drilled through the forks and the employer did not ensure the forklift operator was trained and evaluated in truck related topics such as, but not limited to, vehicle inspection.
Recent events (2)
  • — I (S) $3263.25
  • — Z (S) $4351

1910.178 P01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $0.00 Reduced
29 CFR  1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s):  On or about March 16, 2022, employees were exposed to fall hazards of 14 feet to a lower level when working from a platform which was raised by a forklift and the employer did not remove from service two forklifts with holes drilled through the forks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4351

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345840839.