Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

LACONIA, NH —

OSHA Inspection: AMATEX CORPORATION

Complaint inspection · Safety discipline

At a glance

On , OSHA opened a complaint safety inspection of AMATEX CORPORATION in 45 PRIMROSE DRIVE SOUTH, LACONIA, NH 03246 (NAICS 326199). OSHA activity number 345865257.

Watch Amatex Corporation — free Get an email when a new federal OSHA severe-injury report for Amatex Corporation is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
AMATEX CORPORATION
Site address
45 PRIMROSE DRIVE SOUTH
City
LACONIA
State
NH
ZIP
03246
Mailing
45 PRIMROSE DRIVE SOUTH, LACONIA, NH 03246

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
326199
Employees
27
Ownership type
A

Citations

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 4 instances 4 exposed
Issued
Abate by
Penalty
Initial $814.00 · Current $814.00

General-duty citation text

29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section:  The employer did not furnish the abatement required for citations issued within 10 calendar days for Citation No. 1 Item No(s). 1, 2a, 2b and 2c nor did they respond to the progress report letter sent July 14, 2022.
Recent events (1)
  • — Z (O) $814

1910.212 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $7252.00

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Site - On or about March 28, 2022, the Muller Loom machine was not guarded at the point of operation.
Recent events (1)
  • — Z (S) $7252

1910.219 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $7252.00

General-duty citation text

29 CFR  1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  a. Winding machine #2 - On or about March 28, 2022, the rotating projecting shaft end was not guarded to prevent employees hands and fingers injuries from inadvertent contact.
Recent events (1)
  • — Z (S) $7252

1910.219 D01

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Winding machine #2 - On or about March 28, 2022, the machine's belt and pulley were not adequately guarded to prevent inadvertent contact with nip points.
Recent events (1)
  • — Z (S) $0

1910.219 E03 II

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(e)(3)(ii):All guards for inclined belts were not arranged in such a manner that a minimum clearance of seven (7) feet is maintained between belt and floor at any point outside of guard:  Winding machine #2 - On or about March 28, 2022, the machine's inclined belt was not enclosed by a guard to prevent inadvertent contact with nip points.
Recent events (1)
  • — Z (S) $0

More inspections at AMATEX CORPORATION

View AMATEX CORPORATION's full OSHA safety record →

More inspections in this industry (NAICS 326199)

More inspections in NH

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345865257.