Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BUSINESS INTERIORS FLOOR COVERING BUSINESS TRUST

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of BUSINESS INTERIORS FLOOR COVERING BUSINESS TRUST in 100 TWIN RIVER ROAD, LINCOLN, RI 02865 (NAICS 238330). OSHA activity number 346236086.

Watch Business Interiors Floor Covering Business Trust — free Get an email when a new federal OSHA severe-injury report for Business Interiors Floor Covering Business Trust is published. One employer, no account, unsubscribe in one click.
Site address
100 TWIN RIVER ROAD
City
LINCOLN
State
RI
ZIP
02865
Mailing
16 EVERBERG ROAD, WOBURN, MA 01801
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238330
Employees
2
Ownership type
A

5 citations on file for this inspection.

1910.134 E01

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $5076.00 Reduced
29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace.  (a) Worksite: On or about 9/21/2022, an employee was not provided a medical evaluation and was required to use a respirator while working around silica dust.
Recent events (2)
  • — I (O) $5076.4
  • — Z (S) $7252

1910.134 F01

Other-than-serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT).  (a) Worksite: On or about 9/21/2022, an employee was exposed to silica dust while utilizing a respirator without a fit test.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 K01

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.134(k)(1): The employer did not provide effective training to employees who were required to use respirators.  (a) Worksite: On or about 9/21/2022, an employee was performing concrete grinding operations, requiring the use of a respirator, without the benefit of adequate respiratory protection training.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.303 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4931.00 · Current $3452.00 Reduced
29 CFR  1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  (a) Worksite: On or about 9/21/2022, an employee was exposed to flying chips and debris while grinding concrete with an unguarded Milwaukee hand-held grinding tool.
Recent events (2)
  • — I (S) $3451.7
  • — Z (S) $4931

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $5076.00 Reduced
29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  (a) Worksite: On or about 9/21/2022, an employee was exposed to respirable silica dust while performing concrete grinding without the use of engineering controls, work practices, and respiratory protection specified for the task on Table 1.
Recent events (2)
  • — I (S) $5076.4
  • — Z (S) $7252

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346236086.