1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: SEAL & DESIGN INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of SEAL & DESIGN INC. in 4015 CASILIO PARKWAY, CLARENCE, NY 14031 (NAICS 339991). OSHA activity number 346321466.

Watch Seal & Design INC. — free Get an email when a new federal OSHA severe-injury report for Seal & Design INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SEAL & DESIGN INC.
Site address
4015 CASILIO PARKWAY
City
CLARENCE
State
NY
ZIP
14031
Mailing
4015 CASILIO PARKWAY, CLARENCE, NY 14031
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339991
Employees
115
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $6340.00 · Current $3000.00 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about 11/02/2022, in the Bun Splitter Area, Lockout/Tagout (LOTO) procedures were not utilized when changing the blade on the F-K Bun Splitter #1603 exposing employees to the unexpected startup of the F-K Bun Splitter #1603.  NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $3000
  • — C (S) $6340
  • — Z (S) $6340

1910.147 C07 I A

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.147(c)(7)(i)(A): Each authorized employee had not received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:  a) On or about 11/2/2022, Bun Splitter Area, employer did not provide Lockout/Tagout(LOTO) training to authorized employees that performed maintenance and servicing activities on machines such as, but not limited to: replacing blade on F-K Bun Splitter #1603.  NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.212 A02

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $13052.00 · Current $7500.00 Reduced
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible  a) On or about 10/21/2022, in Clean & Pack, when employee was operating the grommet machine, the guard was not affixed to the machine, exposing employee to fingertip amputations when grommet machine was actuated.   NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $7500
  • — C (S) $13052
  • — Z (S) $13052

1910.242 B

Serious Gravity 1 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $4754.00 · Current $2500.00 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) On or about 11/2/2022, in Clean & Pack, employees are exposed to flying debris when using airlines for cleaning parts with compressed air pressures of about 105 p.s.i without a regulated nozzle.  b) On or about 11/2/2022, in the Bun Splitter Area, employees are exposed to flying debris when using airlines for cleaning F-K-Bun Splitter machine with compressed air pressures of about 83 p.s.i without a regulated nozzle.  ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $2500
  • — C (S) $4754
  • — Z (S) $4754

View SEAL & DESIGN INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346321466.