MONROE, LA —
OSHA Inspection: SHARPCO, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SHARPCO, INC. in 8770 FRONTAGE ROAD, MONROE, LA 71202 (NAICS 332312). OSHA activity number 346390867.
Where did this inspection happen?
- Establishment
- SHARPCO, INC.
- Site address
- 8770 FRONTAGE ROAD
- City
- MONROE
- State
- LA
- ZIP
- 71202
- Mailing
- 8770 FRONTAGE ROAD, MONROE, LA 71202
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3572.00 · Current $2143.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about December 14, 2022, employees were utilizing machines and equipment without machine guarding: A. Daito band saw B. MSC table saw C. Lagun drill press D. Supermax horizontal drill
Recent events (2)
- — I (S) $2143.2
- — Z (S) $3572
1910.147 C04 II
- Issued
- Abate by
- Penalty
- Initial $501.00 · Current $301.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: (A) A specific statement of the intended use of the procedure; (B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy; (C) Specific procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the responsibility for them; and (D) Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures. On or about December 14, 2022, the employer failed to properly develop clear and specific procedures within Sharpco Inc's LO/TO program.
Recent events (2)
- — I (O) $300.6
- — Z (O) $501
1910.147 C06 II
- Issued
- Abate by
- Penalty
- Initial $501.00 · Current $301.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection. On or about December 14, 2022, the employer failed to certify periodic inspection were being performed.
Recent events (2)
- — I (O) $300.6
- — Z (O) $501
More inspections in this industry (NAICS 332312)
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
CAMDEN, NJ—2026-07-08
CENTRAL METALS, INC.
SACRAMENTO, CA—2026-07-07
MARTIN'S STEEL WORKS, INC
LOUISVILLE, KY—2026-07-01
69275 - NORTH AMERICAN INDUSTRIAL SUPPLY INC
More inspections in LA
AMELIA, LA—2026-07-10
CONRAD SHIPYARD, LLC
MORGAN CITY, LA—2026-07-10
G4 SERVICES LLC
PIERRE PART, LA—2026-07-08
DOLLAR GENERAL
LAKE CHARLES, LA—2026-07-01
GULF COAST FORENSIC SOLUTIONS
BATON ROUGE, LA—2026-06-26
TRAFFIC CONTROL PRODUCTS CO. OF LOUISIANA, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346390867.