OSHA Inspection: GULF COAST CABINET DOORS

Issued

2023-05-17 00:00:00

Penalty

Initial $2732.00 · Current $1639.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) At the jobsite, the Kentwood M609S CNC machine had the safety interlock by-passed, permitting access to the rotating chuck and exposing employees amputation hazards.

Issued

2023-05-17 00:00:00

Abate by

2023-05-24 00:00:00

Penalty

Initial $3214.00 · Current $1928.00 Reduced

General-duty citation text

29 CFR  1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut:  a) At the jobsite, on the Saw-Stop Professional Table saw the automatic adjusting hood was missing, exposing employees to the hazards of cuts and amputations.

Issued

2023-05-17 00:00:00

Abate by

2023-05-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.213(c)(2):Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw of being thrown back on the operator:  a) At the jobsite, on the Saw-Stop Professional Table saw the spreader was missing, exposing employees to the hazards of cuts and amputations.

Issued

2023-05-17 00:00:00

Abate by

2023-05-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.213(c)(3):Hand-fed circular ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  a) At the jobsite, on the Saw-Stop Professional Table saw the non kickback fingers were missing, exposing employees to the hazards of being struck by wood pieces.