WICHITA, KS —
OSHA Inspection: CCM COUNTERTOP & CABINET MANUFACTURING, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CCM COUNTERTOP & CABINET MANUFACTURING, LLC in 2945 SOUTH KANSAS STREET, WICHITA, KS 67216 (NAICS 337110). OSHA activity number 346467590.
Where did this inspection happen?
- Establishment
- CCM COUNTERTOP & CABINET MANUFACTURING, LLC
- Site address
- 2945 SOUTH KANSAS STREET
- City
- WICHITA
- State
- KS
- ZIP
- 67216
- Mailing
- 2945 SOUTH KANSAS STREET, WICHITA, KS 67216
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 10
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Abate by
- Penalty
- Initial $4018.00 · Current $2411.00 Reduced
General-duty citation text
29 CFR 1910.134(c)(1):A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: Employees engaged in cabinet manufacturing activities at the assembly area are required to use an N-95 respirator and no written respiratory program is made available.
Recent events (2)
- — I (S) $2410.8
- — Z (S) $4018
1910.134 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. Employees engaged in cabinet manufacturing activities at the assembly area are exposed to pulmonary hazards and/or cardiac stress hazards when using required N-95 respirators without having been provided a medical evaluation prior to use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.134(f)(2):Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: Employees engaged in cabinet manufacturing activities at the assembly area are required to use an N-95 respirator and no fit testing has been conducted.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 G02
- Issued
- Abate by
- Penalty
- Initial $2679.00 · Current $1607.00 Reduced
General-duty citation text
29 CFR 1910.178(g)(2):Battery changing and charging installations for industrial trucks were not provided with facilities for flushing and neutralizing spilled electrolyte: Employees engaged in forklift battery charging activities at the shop are exposed to chemical hazards. No spill kit is made available for the charging station. Battery acid can cause skin irritation and/or burning, nose and throat irritation or coughing and shortness of breath upon inhalation.
Recent events (2)
- — I (S) $1607.4
- — Z (S) $2679
1910.178 L02 II
- Issued
- Penalty
- Initial $3415.00 · Current $2049.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. Employees engaged in forklift activities at the receiving area are exposed to struck-by hazards. Employees have not completed a written test, practical test nor been evaluated prior to operating a forklift.
Recent events (2)
- — I (S) $2049
- — Z (S) $3415
1910.212 A03 II
- Issued
- Penalty
- Initial $2277.00 · Current $1366.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Employees engaged in cabinet manufacturing activities at the assembly area are exposed to struck-by hazards when using the Minipress "MSP". Drill press did not have a guard on it.
Recent events (2)
- — I (S) $1366.2
- — Z (S) $2277
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $3349.00 · Current $2009.00 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): Employees engaged in cabinet manufacturing activities at the assembly are are exposed to health hazards. Employees utilize Pro Bond NF Low VOC Cannister Adhesive, ethyl alcohol and toluol for the cabinet assembly process and ho written hazard communication program has been implemented. These chemical are all flammable and can cause irritation.
Recent events (2)
- — I (S) $2009.4
- — Z (S) $3349
More inspections in this industry (NAICS 337110)
OAKLAND PARK, FL—2026-07-16
PKB CABINETRY
ORLANDO, FL—2026-07-15
ROSTOV, LLC
RICHMOND HILL, GA—2026-07-14
WILSON CABINETRY, LLC
VESTAL, NY—2026-07-08
BARNWOOD KITCHEN CABINETS
DEERWOOD, MN—2026-07-02
111522 - DUFFNEY CUSTOM CABINETS LLC
More inspections in KS
SHAWNEE, KS—2026-07-15
BECKER EXTERIORS
SHAWNEE, KS—2026-07-15
DLR RENOVATION
SHAWNEE, KS—2026-07-15
LUIS ARIAS
OLATHE, KS—2026-07-15
U.S. POSTAL SERVICE
ARKANSAS CITY, KS—2026-07-15
SKYLINE HOMES
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346467590.