Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JACOB MILLER

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of JACOB MILLER in 640 COUNTY LINE ROAD, HOBART, WI 54115 (NAICS 238130). OSHA activity number 346477870.

Watch Jacob Miller — free Get an email when a new federal OSHA severe-injury report for Jacob Miller is published. One employer, no account, unsubscribe in one click.
Establishment
JACOB MILLER
Site address
640 COUNTY LINE ROAD
City
HOBART
State
WI
ZIP
54115
Mailing
N3198 BERNITT ROAD, TIGERTON, WI 54486
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.178 L02 II

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2679.00 · Current $1000.00 Reduced
29 CFR  1910.178(l)(2)(ii):The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.  On or about February 1, 2023, at a worksite located at 640 County Line Road Hobart, WI, operators of the Sky Trak All-Terrain Forklift were not provided formal / practical training as well as an evaluation of performance in the workplace.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2679

1926.453 B02 V

Deleted Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $0.00 Reduced
29 CFR  1926.453(b)(2)(v):A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated.  On or about February 1, 2023, at a worksite located at 640 County Line Road Hobart, WI, employees working from a Genie Articulating Boom Lift were doing so without a harness or a body belt and adequate anchorage.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3349

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4688.00 · Current $3688.00 Reduced
29 CFR  1926.501(b)(1):Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On or about February 1, 2023, at a worksite located at 640 County Line Road Hobart, WI, employees installing truss purlins on a commercial horse barn at a height greater than six feet were doing so without fall protection.
Recent events (2)
  • — I (S) $3688
  • — Z (S) $4688

1926.503 A02 VIII

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $0.00 Reduced
29 CFR  1926.503(a)(2)(viii):The employer did not assure that each employee had been trained by a competent person qualified in the standards contained in subpart M:  On or about February 1, 2023, at a worksite located at 640 County Line Road Hobart, WI, the employees on site were not familiar with the OSHA fall protection standards and the requirements held within.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3349

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346477870.